anybody have a "sleepy eye" kit?

lilman87 · 02-21-2006, 06:46 PM

once u set the angle of the lights, how do u make it so the lights are not just pointing at the ground?

burton51m · 02-23-2006, 03:32 AM

just raise em so they are high enuf that you get some light(halfway?) i put mine back to normal so i forget. i have fog lights that are bright too so that makes up for it. just make sure they arent too low that you dont have any light and they arent "too sleepy". they will always be pointing lower than normal when you have sleepy eyes.

does that help?

The Amazing Spider-Man · 03-01-2006, 08:58 AM

http://www.racingdimension.com/index...ROD&ProdID=275
you can get 'em cheaper than this on other sites

supra_91 · 03-23-2006, 02:39 PM

it's cheaper here

http://www.intensepower.com/pihecosey.html

FullOfProblemsMKIII · 03-30-2006, 12:01 AM

this is what i did and the lights point straight when they're open only 2 inches....unscrew the 2 little screws taht hold the lamp in and get 2 3 inch screws with 2 2 1/4 inch plastic tubes that fit around the screws....put the screws in the frame holes and tubes onto the screws ...put some jb weld along the bottom the the lamp and frame and let it dry...then juss screw them in n wa la....thats what i did....ORRRRR you can get gmc fog lamps that are as wide as the supra lamps but are2-3 inches in height n do the same procedure....

JIMMY JAMES · 07-27-2006, 03:01 PM

Quote:

Originally Posted by burton51m

just raise em so they are high enuf that you get some light(halfway?) i put mine back to normal so i forget. i have fog lights that are bright too so that makes up for it. just make sure they arent too low that you dont have any light and they arent "too sleepy". they will always be pointing lower than normal when you have sleepy eyes.

does that help?

does the 87 have this option?

Boostesi · 10-24-2006, 05:26 AM

if they were pointing straight up, they wouldnt be sleepy, they would be awake eyes lol... but theres another way they do it in the 240sx that involves 2 switches you install, and you just fuck with them and adjust the lights how you want, like one switch cuts the power to the motors as there going up, so you turn the lights on, and hit the switch on and off and themotor flicks up a little each time... ill ask my boy how to do it in a min after we finish throwing these adjustable control arms and tension rods on his 300z

supraman121 · 12-18-2006, 01:12 AM

There is a light wire underneath the dash you cut that and then hook a switch up to it so you can flip the switch when the lights are at the positon you want, but it will shut off the head lights cause the switch will then act like a breaker

h0h0 · 09-25-2008, 09:13 PM

I found them on this site, they're electronic setups, i think they're a little on the pricey side and they're also made in japan. Car Body Kits for Pontiac Mitsubishi Honda Mustang Acura etc

mk3supra909 · 02-27-2009, 10:22 PM

ok well i saw alot of ppl on here saying that they dont make sleepy eyes conversion motors or kits for mk3 "lies lies lies" they have them on ebay look up "mk3 sleepy eye kit" its like $27.91 or some shit they have plenty too also there is many other ways to do it. you um idk uncreative!!!! ppl just set your light were you want them and unplug your wire harness for the motors. cap off the live wire and your good to go duhhhh lol mann ppl. well yeah also just to let ppl know there isnt and probably wont be any mass produced flush mount headlight unfortunalely they arent in high demand ne ways go to this website if you wud like to try and make your own they look great but take some work and destruction any who just letting ppl know that sleepy eyes do exist for our cars My Flushmounts and How I Did It - Supra411 Forums

02-23-2006, 03:32 AM	#2
burton51m Lexus & 550's Join Date: Feb 2006 Location: Canton, OH Posts: 536	just raise em so they are high enuf that you get some light(halfway?) i put mine back to normal so i forget. i have fog lights that are bright too so that makes up for it. just make sure they arent too low that you dont have any light and they arent "too sleepy". they will always be pointing lower than normal when you have sleepy eyes. does that help? __________________

03-23-2006, 02:39 PM	#4
supra_91 Lexus & 550's Join Date: Sep 2005 Location: Illinois Posts: 521	it's cheaper here http://www.intensepower.com/pihecosey.html __________________ 91 N/A automatic supra;K&N FIPK;2.5" custom exhaust;no cat;pacesetter header;eibach springs;tokico "blues";MKIV TT rims

03-30-2006, 12:01 AM	#5
FullOfProblemsMKIII 3" Exhaust Join Date: Feb 2006 Location: Long Island Posts: 71	this is what i did and the lights point straight when they're open only 2 inches....unscrew the 2 little screws taht hold the lamp in and get 2 3 inch screws with 2 2 1/4 inch plastic tubes that fit around the screws....put the screws in the frame holes and tubes onto the screws ...put some jb weld along the bottom the the lamp and frame and let it dry...then juss screw them in n wa la....thats what i did....ORRRRR you can get gmc fog lamps that are as wide as the supra lamps but are2-3 inches in height n do the same procedure.... __________________ oh shit sry officer....you caught me spoolin....

10-24-2006, 05:26 AM	#7
Boostesi Stock Join Date: Oct 2006 Location: Rhode Island Posts: 21	if they were pointing straight up, they wouldnt be sleepy, they would be awake eyes lol... but theres another way they do it in the 240sx that involves 2 switches you install, and you just fuck with them and adjust the lights how you want, like one switch cuts the power to the motors as there going up, so you turn the lights on, and hit the switch on and off and themotor flicks up a little each time... ill ask my boy how to do it in a min after we finish throwing these adjustable control arms and tension rods on his 300z __________________ pacesetter cat back

12-18-2006, 01:12 AM	#8
supraman121 12psi boost Join Date: Aug 2006 Location: North Carolina Posts: 361	There is a light wire underneath the dash you cut that and then hook a switch up to it so you can flip the switch when the lights are at the positon you want, but it will shut off the head lights cause the switch will then act like a breaker __________________ Upgrades- 225/50/R16's Kumho ECSTA AST (KU25) 273 bucks with shipping Magnaflow exhaust NO KAT K&N Air Filter www.myspace.com/coreyjstevens http://vids.myspace.com/index.cfm?fu...oid=1536317037 <------ this one should work check out the accident one aswell ya i might be a "fat kid" but i sure can move fast!~

02-21-2006, 06:46 PM	#1
lilman87 Stock Join Date: Oct 2005 Location: Illinois Posts: 20	once u set the angle of the lights, how do u make it so the lights are not just pointing at the ground?

03-01-2006, 08:58 AM	#3
The Amazing Spider-Man Stock Join Date: Feb 2006 Location: Santa Clarita Posts: 2	http://www.racingdimension.com/index...ROD&ProdID=275 you can get 'em cheaper than this on other sites

09-25-2008, 09:13 PM	#9
h0h0 Stock Join Date: Sep 2008 Location: Bay Area, California Posts: 4	Sleeeepers I found them on this site, they're electronic setups, i think they're a little on the pricey side and they're also made in japan. Car Body Kits for Pontiac Mitsubishi Honda Mustang Acura etc __________________ First Toy: 89 MkIII, Turbo, Targa, A/T, 100k~ Miles Modifications- -None yet, Need a better paying job first. Hehe.

02-27-2009, 10:22 PM	#10
mk3supra909 Stock Join Date: Jan 2009 Location: 909 Posts: 7	flushmount headlights and sleepy eye conversion ok well i saw alot of ppl on here saying that they dont make sleepy eyes conversion motors or kits for mk3 "lies lies lies" they have them on ebay look up "mk3 sleepy eye kit" its like $27.91 or some shit they have plenty too also there is many other ways to do it. you um idk uncreative!!!! ppl just set your light were you want them and unplug your wire harness for the motors. cap off the live wire and your good to go duhhhh lol mann ppl. well yeah also just to let ppl know there isnt and probably wont be any mass produced flush mount headlight unfortunalely they arent in high demand ne ways go to this website if you wud like to try and make your own they look great but take some work and destruction any who just letting ppl know that sleepy eyes do exist for our cars My Flushmounts and How I Did It - Supra411 Forums