mHg size?

suprra_girl · 07-23-2005, 08:21 AM

ok so it's a virgin engine... so get a 1.2mm hks gasket and arp head studs

you NEED to prep the head and block for a mhg

will you be upping the power or just keeping it stock?

if you are going for power.. prep head and block, mhg, arps

do it properly or it will blow another hg

if you are keeping it stockish... stock toyota head gasket will be fine just get new head bolts as well and you can get away with prepping the block, you still need to clean the block and make sure it's perfectly smooth.. take the head to the shop and get it checked for warpage or softness etc

gl

07-23-2005, 08:21 AM	#4
suprra_girl 7M POWAH! ;) Join Date: Jun 2004 Location: New Zealand Posts: 2,312	ok so it's a virgin engine... so get a 1.2mm hks gasket and arp head studs you NEED to prep the head and block for a mhg will you be upping the power or just keeping it stock? if you are going for power.. prep head and block, mhg, arps do it properly or it will blow another hg if you are keeping it stockish... stock toyota head gasket will be fine just get new head bolts as well and you can get away with prepping the block, you still need to clean the block and make sure it's perfectly smooth.. take the head to the shop and get it checked for warpage or softness etc gl __________________ Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first!