thermostat

IHateHacks · 06-22-2007, 10:13 PM

And don't tighten those 2 10mm bolts too tight, you can strip the threads out of the aluminum and you'll be helicoiling it.

I think the spec is like 80in/lbs. Maybe 86in/lbs. That's about 7ft/lbs.

06-22-2007, 10:13 PM	#4
IHateHacks 20psi boost Join Date: May 2006 Location: New Haven/Hamden Posts: 793	And don't tighten those 2 10mm bolts too tight, you can strip the threads out of the aluminum and you'll be helicoiling it. I think the spec is like 80in/lbs. Maybe 86in/lbs. That's about 7ft/lbs.