90' Supra Turbo A/T Build

[mkiiisupra]

reserved for future posts3

[mkiiisupra]

Currently working on a upgrade to my coolant system. This includes all new lines for everything.

After alot of looking around decided to go with the HASTE aluminum radiator 3 row design from 935motorsports... Mainly becuase the price on the PWR radiator jumped up on me 100bucks and 300 was alot more appealing than 500. Ill post pictures and a review of it once it gets here. Still waiting on a shipping date from 935.

Also ordered alot of my other parts from summitracing including the following:

AER-FBM1012 6an straight hose ends X 4 @ 6.95 ea
AER-FBM2013 Straight 6an to 1/2 NPT fitting X 6 @ 4.95 ea
AER-FBM2246 12mmX1.5 to 6an fitting X 2 @ 9.95 ea
AER-FBM4032 90 degree hose end 6an X 4 @ 19.88 ea
AER-FCA0620 -6an 20ft steel braided hose X 1 @ 99.95 ea
BMM-70266 Trans Cooler 11"X8"X1.5" X 1 @ 75.95 ea
PRM-1070 Remote oil thermostat X 1 @ 41.88 ea

Hope fully that will be all i need for my Transmission cooling system Pretty sure the hard lines for the tranny that screw into the Transmission are 12mm and i went with B&M Trans cooler due to the Stacked plate design. The Permacool thermostat and All aeromotive fittings/hoses.

Also orderd some of the parts i needed for the Motor Oil cooling system, not all cuase i need wait to get paid again

PRM-111 Oil Filter Spin on X1 @ 10.95 ea
PRM-1221 Dual Filter Mount X1 @ 31.95 ea

Thats it for now i will post pics of everything soon as it gets here as well as installation pics but with everything else i still need will be 3-4wks before i can start

[mkiiisupra]

Also read somewhere about using a mkII lower radiator hose instead of MKIII becuase it takes a much more direct route. If anyone has any more info or pics of this id appreciate it becuase im probably going to go this route

[mkiiisupra]

Well had problems getting the HASTE radiator from 935motorsports aparntly he could not get ahold of the distributor at all for a whole month so i went ahead and cancled my order.

Going to go ahead and spend the extra coin on the PWR radiator should be ordering it thursday along with the rest of the AN fittings and lines ill need

[mkiiisupra]

Finished order'n the rest of the parts i needed to do redo all my cooling systems. New stainless steel braided lines for turbo/tranny/oil all Aeroquip lines/fittings. Hopefully i have everything i need probably spent about 1600-1800 total.

Decided to go with the PRM-19113 13" fan rated at about 2600cfm. I wanted the 14" but its sold out everywhere i looked untill october. Also ordered a PWR Radiator 500 after shipping from hpf.

Once i get it all in i will post up some pics