fiberglass

Supra2NR · 08-06-2006, 08:59 PM

what material can be used to mold and shape fiberglass
like what material can i use and the fiber glass wont stick to it when im moulding them?

Supra2NR · 08-07-2006, 04:03 PM

nobody? anyone?

Bill UK · 08-07-2006, 05:02 PM

At a guess PTFE spray. try these links, if you are making rear wheel arches knock a couple up for me !

http://www.resin-supplies.co.uk/release.htm

http://www.cfsnet.co.uk/acatalog/CFS_Catalogue__Release_Agents_76.html

Supra2NR · 08-08-2006, 04:49 AM

that not a bad idea about the arches
i was gonna do a second version of my wind splitters since the first ones were made out of wood
not the best material but it was a trial

but i'll see what i can do about the arches

theWeezL · 08-09-2006, 05:26 PM

alot of guys use tin foil to cover the item being molded. I peels off easily and wont leave any residue on the molded part or the mold.

Supra2NR · 08-10-2006, 05:35 AM

not a bad idea,
works beautifully, and most important, its cheap
and you can get in your local grocery store

jus the type of material that were used to arent we?lol

08-06-2006, 08:59 PM	#1
Supra2NR 1000whp postwhore Join Date: Apr 2006 Location: Chi-Town Posts: 1,643	fiberglass what material can be used to mold and shape fiberglass like what material can i use and the fiber glass wont stick to it when im moulding them? __________________ http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol

08-07-2006, 04:03 PM	#2
Supra2NR 1000whp postwhore Join Date: Apr 2006 Location: Chi-Town Posts: 1,643	nobody? anyone? __________________ http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol

08-08-2006, 04:49 AM	#4
Supra2NR 1000whp postwhore Join Date: Apr 2006 Location: Chi-Town Posts: 1,643	that not a bad idea about the arches i was gonna do a second version of my wind splitters since the first ones were made out of wood not the best material but it was a trial but i'll see what i can do about the arches __________________ http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol

08-09-2006, 05:26 PM	#5
theWeezL 12psi boost Join Date: May 2006 Location: Oregon Posts: 376	alot of guys use tin foil to cover the item being molded. I peels off easily and wont leave any residue on the molded part or the mold. __________________ *____________* *Eagles may soar, but weezl's never get sucked into jet engines!*

08-10-2006, 05:35 AM	#6
Supra2NR 1000whp postwhore Join Date: Apr 2006 Location: Chi-Town Posts: 1,643	not a bad idea, works beautifully, and most important, its cheap and you can get in your local grocery store jus the type of material that were used to arent we?lol __________________ http://www.myspace.com/supra_2nr Into Bikes now,, apparently the supra couldnt kill me, so my zx6 might lol

08-07-2006, 05:02 PM	#3
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	At a guess PTFE spray. try these links, if you are making rear wheel arches knock a couple up for me ! http://www.resin-supplies.co.uk/release.htm http://www.cfsnet.co.uk/acatalog/CFS_Catalogue__Release_Agents_76.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Gauging intrest in fiberglass mk3 parts...	Isphius	MKIII Supra	12	11-28-2006 01:25 AM
eliminating rust	khills	Exterior , Interior, and Detailing	3	10-03-2006 01:22 AM
plastic or fiberglass panels???	boner1115	Road Racing & Autocross	4	10-04-2005 08:35 PM