Vaccum tube ID help

Bill UK · 10-04-2008, 11:39 PM

Quote:

Originally Posted by bowhunter951

So, I still have not quite figured out where the 2 vaccum hoses that come off the thermostat housing BVSV go. Mine are missing and I can't figure out where they are sposed go or if they control the heater. As seen in Picture. Any help would be appreciated.

Looks like they connect to the vac and charcoal canister. We don’t have charcoal canister in the UK, so ours are capped off.

Bill UK · 10-04-2008, 11:51 PM

This is from the online EPC Link , will check mine out tomorrow morning.

ddmcse · 10-05-2008, 12:55 PM

your switch is busted,
take hose # 88690C pull it from the bottom of the switch , and plug it into the the top of the like you see in my picture from the post above. when you step on the gas the value will open and you'll get heat .

10-05-2008, 12:55 PM	#3
ddmcse 500whp yet? Join Date: Jun 2005 Location: CT U.S.A. Posts: 966	your switch is busted, take hose # 88690C pull it from the bottom of the switch , and plug it into the the top of the like you see in my picture from the post above. when you step on the gas the value will open and you'll get heat . __________________ 300+ RW HP Dyno run, jdm,mod turbo,3"exh,electfan,greddyboost Blown HeadGasket info My Supra KiXGaS

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil in my intake tube	ClutchR1	MKIII Supra	2	10-25-2008 04:16 AM
vaccum line help	boogum7	MKIII Supra	6	09-28-2006 10:43 PM
Vaccum diagram???	h8z2luze	MKIII Supra	5	08-11-2006 02:47 AM
Turbo intake tube	Reeves	MKIII Supra	6	11-24-2005 08:44 AM

10-04-2008, 11:51 PM	#2
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	This is from the online EPC Link , will check mine out tomorrow morning.