Wiring Help for Boost Controller, Fuel Cut, & Turbo Timer (Other forums suck!)

Codyjamesuno · 01-20-2012, 04:07 AM

Quote:

Originally Posted by priyesh12

Thanks,

But I live in a very rural area, there aren't any decent technicians here that I can take it to, I would have to go to south Africa (2 day trip).

yeah, i guess that would be a problem! Im sure the guys can help you on here! They seem to know their !!!!

cre · 01-20-2012, 06:57 AM

For a number of reasons I strongly recommend people avoid wiring anything up to the ECU harness on any vehicle unless the installation guide specifically calls for it. In this case, depending on which part of the turbo timer's wiring you're referring to, the current draw may be significantly higher than the harness can handle (resulting in burnt wiring)... This isn't the only concern but it's one of the biggest.

priyesh12 · 01-20-2012, 02:16 PM

Yeah i guess your right perhaps connecting to ecu might be a risky thing. I have the PDF of the manual for the device below, it's on page 18 (wiring instructions).
So I'm stuck on where to connect the red blue and yellow/green wires.
Perhaps there's a better location to connect those wires...

I appreciate everyone's help

http://gizzmousa.com/file-copies/MS_2_Manual.pdf

01-20-2012, 06:57 AM	#2
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	For a number of reasons I strongly recommend people avoid wiring anything up to the ECU harness on any vehicle unless the installation guide specifically calls for it. In this case, depending on which part of the turbo timer's wiring you're referring to, the current draw may be significantly higher than the harness can handle (resulting in burnt wiring)... This isn't the only concern but it's one of the biggest. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fs: 2001 Msm Turbo Is300 400+whp	richfloresIST	Buy/Sell Cars	3	10-05-2011 01:21 AM
HELP PLEASE	Nick0887	Non-Generation Specific Questions	4	02-28-2009 07:26 AM
Dream Offer	Karma_Supra	MKIV Supra	22	10-17-2007 03:04 PM
Sequential Turbo Question	suprapoweredsoarer	MKIV Supra	1	06-06-2006 12:13 AM
turbo timer	Guest	MKII Supra	5	04-05-2005 06:02 AM

01-20-2012, 02:16 PM	#3
priyesh12 Stock Join Date: Jan 2012 Location: Zambia Posts: 14	Yeah i guess your right perhaps connecting to ecu might be a risky thing. I have the PDF of the manual for the device below, it's on page 18 (wiring instructions). So I'm stuck on where to connect the red blue and yellow/green wires. Perhaps there's a better location to connect those wires... I appreciate everyone's help http://gizzmousa.com/file-copies/MS_2_Manual.pdf