head bolts on jdm engine

tone loc · 06-01-2007, 04:29 AM

got all the bolts out. so when i get the arps i put the molly lube on the threads right?

supramacist · 06-01-2007, 02:09 PM

YA you'll get some molly with the arp's.

Just go ahead and do yourself the favor and spend the 4 or 5 bucks for a whole tube of molly and lube everything.

cre · 06-02-2007, 04:55 AM

Agreed, use some good moly to lube all the moving parts. Nothing's worse than a dry start. Simply pouring motor oil over the cams doesn't do nearly as good of a job as lubing all the bearings, cam lobes and seals, valves and so on with a proper assembly lubricant.

supramacist · 06-03-2007, 09:33 PM

Dry start that f_ucker......., it's gonna run on the first try.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
problem seperating engine from manual tranny	Gengus	MKIII Supra	7	01-29-2008 12:10 AM
head gasket bolts	marc	MKIII Supra	6	10-23-2006 07:23 PM
Head Bolts, Or Head Studs??	ZauggIt1	MKIII Supra	2	08-08-2006 01:23 PM
ARP head bolts	Deputy99	MKIII Supra	2	07-19-2006 11:16 PM
Fel-Pro Head Gasket for Stock 1990 Turbo Engine	Benesesso	MKIII Supra	5	03-10-2006 10:52 PM

06-01-2007, 04:29 AM	#1
tone loc 20psi boost Join Date: Jun 2006 Location: Chicago Posts: 706	got all the bolts out. so when i get the arps i put the molly lube on the threads right?

06-01-2007, 02:09 PM	#2
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	YA you'll get some molly with the arp's. Just go ahead and do yourself the favor and spend the 4 or 5 bucks for a whole tube of molly and lube everything.

06-02-2007, 04:55 AM	#3
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Agreed, use some good moly to lube all the moving parts. Nothing's worse than a dry start. Simply pouring motor oil over the cams doesn't do nearly as good of a job as lubing all the bearings, cam lobes and seals, valves and so on with a proper assembly lubricant.

06-03-2007, 09:33 PM	#4
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	Dry start that f_ucker......., it's gonna run on the first try.