Hi all,

I am sure this question has been asked many times but i cant seem to find a post :-(

I am looking for a new set of aftermarket alloys for my 88 supra, just trying to find out the pcd size and the offset if anyone can help

Thanks

A70 (wide body) supras have a offset of 44. factory wheels are 16x7.
A80 supras have a offset of 50 and come from factory in the following configs.
16x8
16x9
17x9
17x9.5

all A80 wheels are a bad idea on a A70 as the offset is different and even the thinnest A80 wheel is still 1" wider than the A70 wheel.
however a 5mm spacer on the front of a A70 will allow you to run A80 16x8 all round.
dont even think about fitting A80 16x9's to any corner of your A70 unless you plan on putting a overlander kit through it.

using a 17" wheel with a closer offset to 44 as possible will allow you to run wider rim than 8" but the best method is to have them fitted to the car and go for a drive including hard turns and full lock steering to make sure of clearances.


enjoy :) :D

thanks for that drft, as far as i know i have the A70 wide body car but the standard wheels that are already fitted are 16 inch but are already 225mm wide (9 inches) so do i still work with the offset of 44 or should i go for the 50 ?

also i am still trying to find out the pcd setting if anyone knows it,

Thanks again

we've got 16x8's and 16x9's on our widebody jza70 and she looks all good ;)

what is that A70 (widebody)
or MA70 and stuff.. i hear that all the time and dunno what it is.. :huh:

ps. pics would help too :D