opening to dash?
 

ive been putting off moving the switch from my electric fan to the dash; i cant quite find where from under the hood will it lead to the dash. i dont think i need to remove the dash, i just need to get the wires and switch through.

you can poke wires thru where the main harness goes thru, near the brake booster

take the whole kick pannel out and drill thru the firewall toward the back. put a rubber gromet around the hole you drilled so it doesnt get cut. dont take your dash apart to get some wires through the firewall.

i will post some pictures tomorrow on how i did mine. its late now...

don't you have an extra hole in the firewall between to brake booster and master cylinder?
that's where i put all my hoses/wires etc

if you drill around here...http://i8.photobucket.com/albums/a8/...r/P1010014.jpg

http://i8.photobucket.com/albums/a8/...r/P1010008.jpg



...it comes out right about here
http://i8.photobucket.com/albums/a8/...r/P1010015.jpg


i dont know if that helps....

damn it someone did that to my car and im trying to make it manual so tommorow i got to go back and take off all those danm wires and they used some kind of puty which seems its ganna suck trying to take out.

mines has a manual tranny, so ill have to see how that works out. i wont get to it until tomorrow though. thanks for the pics!