exhaust setup

hangsupra · 09-23-2006, 05:39 PM

if you can try to upload the picture again. that will help alot...

mizuboi · 09-24-2006, 07:35 AM

not this but this

hangsupra · 09-24-2006, 07:44 PM

thats the inlet right...

it suck the air in right...

if so then...

for my knowdlege... if you gonna use that turbo then you gonna have the hks or any related air/fuel controller... to control the air n fuel... or else you cannot use it... cause there is no way you can hook up the intake from your afm to that turbo inlet.. cause that inlet.. dont have any space or adapter for you to clamp the intake pipe right... so yeah... or else... you wanna do some custom weld on the inlet... then that is something else.. but i dont recomending... cause it dont looks good after you weld tho...

well yeah.. hope this help you little bit...

Isphius · 09-24-2006, 11:27 PM

? that turbo looks like every turbo, Flange on the exhaust, And a coupler mount for the intake. I dont see what the problem is.

mizuboi · 09-25-2006, 05:08 AM

the first picture is of a normal turbo exhaust portion the second picture is that of my turbo exhaust portion there is no bolting points that is my problem how do i connect that to a down pipe? there is no place for bolts to go

Isphius · 09-25-2006, 10:36 AM

Are you sure thats not a compressor housing? I dont think there is a "coupler" you can put on the exhaust, One of those silicone ones wont do to well with the exhaust gas...lol. Take a picture of the whole turbo for me

hangsupra · 09-29-2006, 01:55 AM

also take picture from difference angle of the turbo so i know what u talking about.. cause like the other guy said.. i dont see the problem tho...

09-24-2006, 11:27 PM	#4
Isphius 500whp yet? Join Date: Nov 2005 Location: Long branch, NJ Posts: 1,006	? that turbo looks like every turbo, Flange on the exhaust, And a coupler mount for the intake. I dont see what the problem is. __________________ Yay the supra assistant is gone!!! WEEE!!

09-25-2006, 10:36 AM	#6
Isphius 500whp yet? Join Date: Nov 2005 Location: Long branch, NJ Posts: 1,006	Are you sure thats not a compressor housing? I dont think there is a "coupler" you can put on the exhaust, One of those silicone ones wont do to well with the exhaust gas...lol. Take a picture of the whole turbo for me __________________ Yay the supra assistant is gone!!! WEEE!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Exhaust for 7MGE	XtreeX	MKIII Supra	19	03-25-2010 01:39 AM
exhaust question (not in exhaust faq)	sd88supra	MKIII Supra	21	11-28-2006 10:52 PM
Exhaust for 7mg(t)e	XtreeX	MKIII Supra	7	03-07-2006 06:08 PM
Dual exhaust, anyone?	lifesnotfair	MKIII Supra	13	12-22-2005 10:41 PM

09-23-2006, 05:39 PM	#1
hangsupra 12psi boost Join Date: Jan 2005 Location: 209 area in cali. Posts: 397	if you can try to upload the picture again. that will help alot...

09-24-2006, 07:44 PM	#3
hangsupra 12psi boost Join Date: Jan 2005 Location: 209 area in cali. Posts: 397	thats the inlet right... it suck the air in right... if so then... for my knowdlege... if you gonna use that turbo then you gonna have the hks or any related air/fuel controller... to control the air n fuel... or else you cannot use it... cause there is no way you can hook up the intake from your afm to that turbo inlet.. cause that inlet.. dont have any space or adapter for you to clamp the intake pipe right... so yeah... or else... you wanna do some custom weld on the inlet... then that is something else.. but i dont recomending... cause it dont looks good after you weld tho... well yeah.. hope this help you little bit...

09-29-2006, 01:55 AM	#7
hangsupra 12psi boost Join Date: Jan 2005 Location: 209 area in cali. Posts: 397	also take picture from difference angle of the turbo so i know what u talking about.. cause like the other guy said.. i dont see the problem tho...