$850 good price for MHG job?

johnnyddn · 07-17-2006, 07:51 PM

I called a shop here in town called Final Stage Motorsports, they quoted me $850 for a HKS 1.2mm MHG with ARP studs. So if I did it my self the cost for parts would be:

HKS MGH = $100
ARP Studs = $120
Lapping job on head = ~$150

So about ~$370 to do it myself vs the shops $850

Not to mention I've never done anything like this before, but if I pay a shop to do this I don't really learn anything.

tone loc · 07-17-2006, 08:48 PM

i would do it myself but then again i have two cars and a cousin who knows a lot about cars. i never bought from hks but i here they have a really good manual to look off.

Isphius · 07-17-2006, 10:01 PM

Well if you plan on boosting the car up or keeping it reliable let the shop do it. That way if it goes bad they have to fix it. It is good to learn tho, but depends on if you think you cando it right or not. Its not THAT hard of a job, as long as you know the 7m motor well enough. Just look on the internet for some rebuild sites.And to answer your original question...Yes that is actually a good deal for the labor hours involved. Id go with it. I got a higher quote than that (1100) for all stock toyota gaskets.

mrnickleye · 07-18-2006, 01:25 AM

MHG means you MUST mill the block too (not just the head).
There is plenty of info on the forum about the MHG install.

Bottom line...the surfaces MUST be extremely smooth, or you blow the gasket quick.

newbsupra · 07-18-2006, 05:00 AM

who did u get that quote from!? toyota is retarded.. i got about 1100 for the headgasket fixed.. its like, $200 for a stock gasket and 800-900 labour... but like he said.. if the shop doesnt do something right, and he blows the MHG.. shop gets to fix it.

id pay the extra and make sure its done right.

OmeGa · 07-18-2006, 06:26 PM

Since I can not really afford to have some one replace my MHG I was just wondering how long it might take me to do it myself. I have never done anything like this before and I figured the best way to learn is to do it on your own.

07-17-2006, 07:51 PM	#1
johnnyddn Stock Join Date: Jul 2006 Location: Las Vegas Posts: 10	$850 good price for MHG job? I called a shop here in town called Final Stage Motorsports, they quoted me $850 for a HKS 1.2mm MHG with ARP studs. So if I did it my self the cost for parts would be: HKS MGH = $100 ARP Studs = $120 Lapping job on head = ~$150 So about ~$370 to do it myself vs the shops $850 Not to mention I've never done anything like this before, but if I pay a shop to do this I don't really learn anything.

07-17-2006, 10:01 PM	#3
Isphius 500whp yet? Join Date: Nov 2005 Location: Long branch, NJ Posts: 1,006	Well if you plan on boosting the car up or keeping it reliable let the shop do it. That way if it goes bad they have to fix it. It is good to learn tho, but depends on if you think you cando it right or not. Its not THAT hard of a job, as long as you know the 7m motor well enough. Just look on the internet for some rebuild sites.And to answer your original question...Yes that is actually a good deal for the labor hours involved. Id go with it. I got a higher quote than that (1100) for all stock toyota gaskets. __________________ Yay the supra assistant is gone!!! WEEE!! Last edited by Isphius; 07-17-2006 at 10:07 PM.

07-18-2006, 01:25 AM	#4
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	Mill the block MHG means you MUST mill the block too (not just the head). There is plenty of info on the forum about the MHG install. Bottom line...the surfaces MUST be extremely smooth, or you blow the gasket quick. __________________ Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
price too good to be true?	oowee623	MKIII Supra	2	08-15-2007 06:47 AM

07-17-2006, 08:48 PM	#2
tone loc 20psi boost Join Date: Jun 2006 Location: Chicago Posts: 706	i would do it myself but then again i have two cars and a cousin who knows a lot about cars. i never bought from hks but i here they have a really good manual to look off.

07-18-2006, 05:00 AM	#5
newbsupra 3" Exhaust Join Date: May 2006 Location: Sask/Canada Posts: 238	who did u get that quote from!? toyota is retarded.. i got about 1100 for the headgasket fixed.. its like, $200 for a stock gasket and 800-900 labour... but like he said.. if the shop doesnt do something right, and he blows the MHG.. shop gets to fix it. id pay the extra and make sure its done right.

07-18-2006, 06:26 PM	#6
OmeGa 3" Exhaust Join Date: Jul 2006 Location: Columbus Posts: 86	Since I can not really afford to have some one replace my MHG I was just wondering how long it might take me to do it myself. I have never done anything like this before and I figured the best way to learn is to do it on your own.