No turn signals :(

Levi1717 · 04-29-2006, 10:00 PM

yes, the flashers could be bad they are above the fuses and they are silver and circular and acouple centimeters tall.......also if you have ur dash out like near the heater unit and radio if you have the flasher switch wires unhooked then this could also cause the blinkers to not work. (speaking of experience) good luck with it

Burn N' Up · 04-30-2006, 05:26 AM

Could be a bad combo swtich too. Check continuity on your combos. I'd explain exactly how but its too complicated to post here... so buy a manual, it'll have everything you need. Usually e-bay has the computer ones, i managed to snag a paperback =D. Also the blinker really might be the problem. It is the first relay above and to the right of all your fuses in the driver's kick. But battery voltage to it at 1 and 3, check continuity at 2 and 4. Also could be your integration realy #2 aka retractor motor module. If not then some wires metled...

04-29-2006, 10:00 PM	#1
Levi1717 3" Exhaust Join Date: Sep 2005 Location: Corinth, Maine Posts: 116	yes, the flashers could be bad they are above the fuses and they are silver and circular and acouple centimeters tall.......also if you have ur dash out like near the heater unit and radio if you have the flasher switch wires unhooked then this could also cause the blinkers to not work. (speaking of experience) good luck with it __________________ 87 N/A with a new JDM 7mge. Looking for a 7mgte

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clear Turn signals	89MK3	Exterior , Interior, and Detailing	2	01-19-2010 12:22 PM
Clear turn signals ?	Gunnar	MKIII Supra	1	10-05-2007 03:08 AM
Turn Signals and Hazards do not work!	Bajaboss	MKII Supra	2	01-26-2007 03:06 AM
clear turn signals	Black'88	MKIII Supra	3	04-05-2006 10:54 PM

04-30-2006, 05:26 AM	#2
Burn N' Up 3" Exhaust Join Date: Sep 2005 Posts: 238	Could be a bad combo swtich too. Check continuity on your combos. I'd explain exactly how but its too complicated to post here... so buy a manual, it'll have everything you need. Usually e-bay has the computer ones, i managed to snag a paperback =D. Also the blinker really might be the problem. It is the first relay above and to the right of all your fuses in the driver's kick. But battery voltage to it at 1 and 3, check continuity at 2 and 4. Also could be your integration realy #2 aka retractor motor module. If not then some wires metled...