no spark
 

hey guys, i have an 87 turbo. I have spark on one cylinder every once in awhile, only a soon as you crank, like one spark. But none on the others. i put a used ignitor on. i ohmd out my cam position sensor and checked my air gap and it checks good. i ohmd my coil pack, its supposed to check .3 to .5, it checks .8. and it has a small crack in it. I have 12v power to my ignitor and coil pack. If that sounds like a good choice i would appreicate a conformation and/or any info. thanks

i would also like to know all of the grounds the would affect this too. thanks again

bridge out the Te1 and E1 ( someonell correct me on those terminals ) and see if it brings up a fault code

Does the check engine light have had to be on to pull a code? Is it really going to tell me something i dont already know. I mean I already got it pretty narrowed down. thanks for the info.

Can anyone tell me which wires plug in were on my themostat housing. I think there are two plugs. My wires got pulled from the connectors and the connectors got lost so I dont know which colors go to which plug.

I tryed to pull codes and had no luck. Does anybody know of a relay that might keep me from getting any spark. its either that or my cps. i have checked everything i know.