Home / Toyota Supra Forums

Go Back   Toyota Supra Forums! Join the Supra forum! > Performance, Modification, and Maintenance Forums - for generation specific discussions > MKIII Supra

Reply
 
Thread Tools Display Modes
Old 12-06-2011, 11:41 PM   #1
mkiii<3
Stock
 
Join Date: Jul 2010
Location: washington
Posts: 13
mkiii<3 is on a distinguished road
Default Valve Cover bolt replacement

Hey guys i had a question i recently replaced the no.3 gasket and did the whole oil drain plug thing discussed on another thread and when i was putting back the valve covers the phillip screw bolts that hold them down gaveme problems when trying to torque them down i ended up strippin the top on two of the screws.. my question is what kind of bolts should i replace ALL of them with and also if i should put washers or use the gold looking washers on the stock bolts on their right now.. thanks..** i read this post: http://www.toyota-supra.info/forums/...placement.html but their talkin about two different type of bolts, which one should i go with?
__________________
1986.5 mkiii manual 7mge n/a (soon2b7mgte)
mkiii<3 is offline   Reply With Quote
Old 12-07-2011, 04:29 AM   #2
cre

Toyota
Racing
Development
 
cre's Avatar
 
Join Date: Apr 2007
Posts: 5,038
cre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond repute
Default

Either conventional hex head bolts or flange head hex bolts... The flange head have a round flare at their base providing a little more distribution of the pressure. These aren't supposed to provide a lot of pressure anyway and just about anything will do if washers are used.

BTW - If you stripped the philips you're either not using the right size screw driver (it's a #3, IIRC) or you're tightening them way too much. Tighten them the 12 in lbs they're spec'd for. If they leak after that then replace the seals and make sure you didn't forget the RTV at the #1 cam caps. Again, that's 12 INCH lbs, NOT FOOT lbs!
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum.

If you're so inclined I'm always more than happy to accept tips via PayPal.
Tip Jar --->
cre is offline   Reply With Quote
Old 12-07-2011, 09:23 AM   #3
mkiii<3
Stock
 
Join Date: Jul 2010
Location: washington
Posts: 13
mkiii<3 is on a distinguished road
Default

Ok thanks cre..

Yeah the reason why I stripped them was because I didnt have the right screw driver and those two bolts wudnt go in all the way and I kept trying till I stripped them and made it worse.. And the torque is 22in lbs for the bolts http://www.cygnusx1.net/Supra/Librar...l.aspx?S=A&P=6
__________________
1986.5 mkiii manual 7mge n/a (soon2b7mgte)
mkiii<3 is offline   Reply With Quote
Old 12-07-2011, 10:55 PM   #4
cre

Toyota
Racing
Development
 
cre's Avatar
 
Join Date: Apr 2007
Posts: 5,038
cre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond reputecre has a reputation beyond repute
Default

Ah yes, 22... Thank you, somewhere my memory got fuzzy. Hope I didn't post 12 in too many other places. Anyway, it is something which people very commonly mistaken to be ft lbs and end up breaking things and that's what I try to make sure people are aware of.
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum.

If you're so inclined I'm always more than happy to accept tips via PayPal.
Tip Jar --->
cre is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Valve cover vent hose Durandal MKIV Supra 3 07-14-2009 01:53 AM
Need a 14mm allen head bolt for valve cover trevor217 MKIII Supra 4 10-30-2008 02:50 PM
valve cover gasket question? sevenmgte MKIII Supra 8 10-01-2008 06:02 AM
88 Turbo Leaking Valve Cover Gaskets Sheridan MKIII Supra 1 11-05-2007 01:03 AM
Valve cover gaskets vancouver874 Non-Generation Specific Questions 7 08-14-2006 07:28 PM


All times are GMT. The time now is 06:28 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.

1986



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87