Question? Would a porsche trans be installed in a 7mg engine?
 

Just wondering if a porsche transmision would be able to fit on a 7mge/gt engine and would it be better than the r-154 and w58,what would you need to make it work if it does? Just wodering and hope someone has an answer?:nuts::werd:

what is wrong with those transmissions

perhaps he has one on hand.

i would imagine you would need to have a bell housing made or an adapter plate to go on the trans. to fit a w/58 or r154 housing. and a custom flywheel.

if your engine is Yoda and your car is Yoda, make ity simple and keep your trans YODA

the force is strong with this one.

:bigthumb:

theres no reason the r154 wouldnt be strong enough. got a buddy running about 500 through his stock one, no problems and he drives it hard (its in his buggy).

but if its something you want to do, and you got some money, mad machinist skills or a good buddy that has said skills, i dont see why not. as long as you can get the proper type of clutch setup with it, you should be able to use the stock type supra flywheel and pressure plate, and a porsche disk.

canadian, how goes the car/engine building?

good, just got to buy a battery and air filter and im ready to try and crank it over.
put mostly everything together on the head with just wrenches, my ratchets were a long ways away and i got a dui so i cant drive and get them...
the wheels on the buss go round and round:( only 2 months to go

i was just wondering about that. cuz i've seen this sick shop were i rebuild my engine on hunts point,bronx,nyc. he was installing a supra r-154 on a mitsubishi conquest tsi 4 cyl. but he was very secret about his project. when i started asking questions. but all he said was yes we are installing a r-154 on the mitsubishi/dodge. with a great big smile while holding the custom adapter he just brought in the shop! this Puerto rican dude is sick!! really efn good guys he did my hole engine oem stock for $1600 on my 7mgte it was sweeeet!!