post a picture of your engine bay
 

7m for now!

Your fan shroud is missing... I'll bet the engine under cover's gone too... Your cooling system will run much more efficiently with both in place (and thus give you more power).

Got hood struts? Mine are from something else than a supra and don't open as far, so I'm not much better. Also :

http://store.driftmotion.com/static/...supra86-92.php

i have flex-a-lite fans in the mail from sip. the hood struts suck they always start leaking oil after a few weeks so f**k it for now i guess thats what you get when you buy shit from autozone :(

holy eff :eek2:...junk yard!

Been there, tried that. The junkyard ones were either missing or so eff'ed up, they were worthless (multiple cracks, chunks missing, crumbled when you touched them....).

Ill post up my engine bay....not quite Supra, but I did use a MK3 timing belt tensioner. Its a 2.5L 16v motor with all forged internals, oversized valves, custom intake and header, Precision Billet 5862, stand alone J+S knock control, and I modded First gen Eclipse onto the engine and am now running ECMLInk on Speed density.

It Dynos at 501whp and 421wtq at 25psi on gas. Ive just bought some larger injectors and hoping for 600whp on the same setup with E85 and a few more lbs of boost!

Id post up my 7mge in my 4runner, but its not really cool, just a stock 7m.




http://i816.photobucket.com/albums/z...518_185331.jpg

http://i816.photobucket.com/albums/z...518_185144.jpg

dam that looks sick

id appreciate a pic of the runner, always lookin for more research pics and how other ppl put one in their pickup/runner :bouncy:

ps, dirty car above, thats a volvo right? im more familiar with the newer models, but that is pretty sexy, nice numbers too!

as for the shroud, get some sheet metal and fab one up, done that a few times. my buddies 06 f150, my yota had one, and my old altima had one. made em all with some sheet metal, snips, angle grinder and a few self tapping screws.

Yea, its a naughty volvo! A 940 model. On a side note, it gets 18mpg in town and 31 on the freeway, that's with the wideband simulation with afr cross point to give me about 15:5.

Ill take a few pics of the runner for you and send ya a PM. I'm really curious about your gze! My runner is kinda unknown, no build thread or anything, and there is a ton of stuff done.