1990 non turbo headgasket

MJG · 02-09-2011, 03:20 AM

I would not go so far as to say installing a MLS in the 7MGE is a waste of money. Over kill, perhaps.
As CRE pointed out, the stock gasket is a fixed thickness. Properly preparing the head and or block, in any head gasket replacement, is a must.
I think too many people see a head gasket replacement as a remove & replace of the gasket alone. Once you shave the head, (depending how much is removed) You will most likely require a thicker head gasket.
Cometic, HKS, Greddy, to name a few, make numerous gaskets with various thicknes and bore dimensions.
If you invest the time and money into the proper install of a MLS head gasket, in a 7MGE, it will out last the car.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1990 supra turbo problem.	Rob1	MKIII Supra	5	04-12-2010 01:34 PM
1990 Supra Turbo -Any Good!!?	ukferrari	MKIII Supra	3	12-13-2009 09:13 PM
HELP PLEASE	Nick0887	Non-Generation Specific Questions	4	02-28-2009 07:26 AM
Dream Offer	Karma_Supra	MKIV Supra	22	10-17-2007 03:04 PM
Sequential Turbo Question	suprapoweredsoarer	MKIV Supra	1	06-06-2006 12:13 AM

02-09-2011, 03:20 AM	#4
MJG 3" Exhaust Join Date: Mar 2010 Location: Washington State Posts: 125	I would not go so far as to say installing a MLS in the 7MGE is a waste of money. Over kill, perhaps. As CRE pointed out, the stock gasket is a fixed thickness. Properly preparing the head and or block, in any head gasket replacement, is a must. I think too many people see a head gasket replacement as a remove & replace of the gasket alone. Once you shave the head, (depending how much is removed) You will most likely require a thicker head gasket. Cometic, HKS, Greddy, to name a few, make numerous gaskets with various thicknes and bore dimensions. If you invest the time and money into the proper install of a MLS head gasket, in a 7MGE, it will out last the car.