| Busted Knuckles |
10-03-2010 03:29 AM |
Quote:
Originally Posted by btwilson86
(Post 88433)
Close, you actually have it backwards though. 0 ohms means almost no resistance, meaning a good conductive wire. Infinite ohms (often represented with a "1" at the beginning of the display on a digital multimeter) means that the 2 reference points are not connected to each other electrically
|
Your right. It was late at night when I wrote that. Fighting a little insomnia.
Quote:
Originally Posted by chopsticks
(Post 88448)
Well i have already opened it and everything looked fine. A buddy of mine told me that is a common problem with the brake lights.
|
Visual inspection alone may not locate the bad connections. You need to check the connections with a multimeter. Having to shake the box is classic symptoms of a bad connection somewhere. |
