1/4mile times
 

There's heaps of talk of all the mods that can be done to these fine pieces of machinery. I wanna know what kinda quarter mile times we're managing to get? my car has been converted to the 1jz with 3" exhaust and 13psi(basically stock). Been to the drags once and ran 13.93. I reckon if people posted their mods and their quarter mile times it might give people an idea of what they should be doing to their cars and what times they should be aiming for.

great idea!!! ;)

here's mine

CURRENT MODS...

Trust Airinx Intake
3" Exhaust
1.8mm BHG (collapsed due to careless manufacturing of gasket)
9.4:1 Compression
9psi (no boost controller)
46 Trim CT26
550x300x75 Intercooler
2 1/2" intercooler hardpipes
HKS Fuel Cut Defender

Current power = 278rwhp/206rwkw @ 9psi

best et = 13.3 @ 106mph on 9psi :)

Store and back; 15 minutes. Old time 17 minutes.

N/A Rebuilt this year. 7MGE 1986.5

.010 off head and .010 off block.

Stock N/A pistons, but a valve job and adjusted valve clearances!

Free flow 3 in exhaust from cat. converter to flowmaster muffler, someday a header.

Someday I will make it to the drag strip, but for now that is the best I can do. I can't even find anyone to street race yet!

Russ

89 7mgte auto!!!

1/4 16.3
if my boost gauage is right i only got 4 lbs, changed stock turbos...
bov
3" downpipe that hits stock...ouch i no-comein in next week the full
and thats it basicly stock

with a cone filter adap.,3" cat-back and a BHG i ran a 15.7@89mph on stock boost...lol it fell on it face hard in 3rd and 4th and then blew a coolant hose.ill be re-posting acfter i get my new head back on

I running, never TRUELY timed but approx 12.8 at 12 lbs with my upgrades,

ur actually supposed to list your upgrades.... that's the point of this exercise lol

erum, my bad......
Stage 3 clutch flywheel,
short throw,
3inch turbo back 5 inch can,
Apex blow off,
Cold air,
Japanese (imported)7m-GTE,
lexus air flow sensor,
Turbo Timer......
MSD Wires,
Carbon Fiber Driveshaft.. no graphite composite.