Toyota Supra Forums! Join the Supra forum!

Toyota Supra Forums! Join the Supra forum! (http://www.toyota-supra.info/forums/)
-   MKIII Supra (http://www.toyota-supra.info/forums/mkiii-supra/)
-   -   7mgte swap vs 1jz swap (http://www.toyota-supra.info/forums/mkiii-supra/16419-7mgte-swap-vs-1jz-swap.html)

Supra Saiyan 03-22-2010 06:25 AM

7mgte swap vs 1jz swap
 
Just a simple thought. My goal is 350hp. I have a 7m N/A engine right now. I can get a 7mgte for $2100 with the man. transmission and all the wiring etc. I also have the choice for a 1jz twin turbo with man. transmission and all the wiring etc. for $2000.

Obviously it would take less mods if I went with the 1jz. However would I still be able to keep the air conditioning? Among any other things that one might like to keep his/her car a daily driver.

Also, I would like to know about how much if any mods are needed for the 1jz swap. I know there are some mods but if someone could throw some type of "MEASUREMENTS" in time or (easy,medium,hard) level of mods. I will be having it professionally done so I am not to worried but am wondering if the money it would take to do 1jz swap including the engine and man tran price will come out to be equal to or better than doing a 7mgte swap and then modding it.

I mean doing the 1jz swap puts me right into 280hp. That's not a far cry from 350hp. I could do the normal mods after that such as exhaust system, intake, etc.. Thus saving me some money due to less over all mods.

Yes I understand parts for the motor are harder to get or more expensive.

Someone help me out here with my logic... Please try not to ref. me to another thread unless it has a simple direct answer to my question.

boosted88mkIII 04-23-2012 04:53 AM

i have a 7mgte as of now and to be honest its not a power house im looking into a 1jz swap motor is more reliable and easier to mod may have a little more money involved but from stuff i have read building a 7mgte is more less building a bomb

cre 04-23-2012 08:09 AM

boosted88mkIII - You haven't even done a swap yet... Come on... get down off the soap box.




Supra Saiyan - There are plenty of benefits and pitfalls to both scenarios. If 350 is your goal I'd stick with the 7M-GTE, source one cheap (NOT JDM) and rebuild it just up to stock specs with a MHG and perhaps forged pistons for longevity. Then proceed as usual. It's going to cost MUCH less and your W58 transmission should be bale to hold up for a few years too unless your drag racing (it's lighter and shifts better than the R154). Do NOT buy ANY used engine from any where and expect to just run it free of trouble. Yes, the 1JZ is more reliable, but the 7M's manage to make it over fifteen to twenty years in many cases before the head gasket blew even at the low torque spec... It's not a crap engine... It's a decent engine with shit DIY garage mechanics working on them. The JZs are easier to get more power out of but if you're looking for around 350 it's not worth the effort in my opinion. In both cases you should do a rebuild, then you've got to swap in electronics (the 7M-GTE's just happen to actually FIT), then you need to make some upgrades and then some tuning.

Green7mgte 04-23-2012 11:27 AM

is it even possible to find a non jdm 1jz? im ready for a rebuild and been toying with the idea for a few years now.

cre 04-23-2012 04:49 PM

Quote:

Originally Posted by Green7mgte (Post 102514)
is it even possible to find a non jdm 1jz? im ready for a rebuild and been toying with the idea for a few years now.

You're not going to find one from anywhere in North, Central or South America... I know they're more common in some other countries but those could all be grey market vehicles initially brought in from Japan as well.... Either way the point still stands: Used = Used. But JDM often = used AND sitting in a rainy, open lot or shipping dock for god know how long. Never drop anything straight in...

Awyman18 04-23-2012 05:37 PM

personally i would stick with the 7m, cheaper, find parts easier and its a all around good engine. yes the 1jz can make power easier, but like cre said, ur gonna need to rebuild it, and u might not even find the right part unless u fork out lots of $$. With the 7m, u can easily reach 350whp. Its not to hard, and if u rebuild it, parts will be cheaper and easier to find. Stupid mechanics just dont know how to work on 7m's, once u find one who does (or u learn urself) than ur golden.

cre 04-23-2012 06:24 PM

It's not just stupid mechanics... It's the ignorant young guys who don't stop to think that a head, block deck and crank THAT long need to be PERFECT. Who don't realize that that light pitting is a killer. Who flat out fail to consider that it's an OLD engine. Hell they don't even have hypereutectic alloy pistons... many builders expect that as the most basic engine at least have that (the 1JZ does). Then there are the cheap owners who THINK they bought a cool car that was a complete bargain. Age isn't a friend of any of these engines nor is the fact that for a decade now they've been so affordable and over-glorified that 90% have been bought up and trashed by stupid little kids. Stupid little kiddies will trash just about anything but these are a favorite because they're often cheaper to find (not keep running or repair though) and it's not the same Honda that all of their friends are driving around and trashing. Finally, there's the fact that the car itself just wasn't that robust. It was Toyota's car for the weekend driver and a showcase for the latest and greatest technology... unfortunately half of the materials they used were later found to age horribly... of course this goes for many 80's cars from many manufacturers.


Shall I continue ranting? It's been about 15 minutes since I've had a good venting.

Awyman18 04-23-2012 08:51 PM

well some of wat ur saying cre is right but alot of it isnt lol but rant if u want, idc lol im only 22, bought my supra and fixed it up, replaced the hg with a friend and havnt had to touch it since. But then again, my supra is almost mint so maybe i got lucky, or maybe its because i take care of it so well lol but yes they MAY be cheaper....but thats if u can find one.

Joefishizzle 04-23-2012 08:54 PM

Just wanted to add, not that I like my 7m, I honestly hate it. However im running 200,XXX on original head gasket. My car is a 86.5, just saying.

Awyman18 04-23-2012 09:40 PM

i assume its stock?


All times are GMT. The time now is 08:32 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87