thermostat housing
 

lookin for a thermostat housing, really just one for the little hose outlets but i dont know wat its called.

your best bet is to look up the local Pull-a-part in your area for it.


do you need the Housing or the outlet piece. the piece that covers the thermostat (outlet) or the piece that it sits in.. (housing)
http://www.cygnusx1.net/Supra/Librar...spx?F=1603&P=2
(note: that diagram is for 7mgte)

your looking at probably 30 dollars for the outlet (the piece that covers the thermostat ordered from a local dealer, according to the tsrm. (probably dated))

thnx but the local pik n pull only has one and tht was my freinds gutted parts car so thts a no go. but its a little outlet tht screws into the housing where the radiator house goes into. its got 2 nipples one has a hose to maf senor area the other to the actual intake mani i think. i would look for at dealer but i dont know what its called. and just my luck my parts car has the same thing broken off

did you look at the link. it gives the part number. its also either the outlet.. the thing that covers the thermostat or the Housing. the thing the thermostat sits in... i answered your questions. =)
good luck.moved this thread out of wtb and into mk3 section.

Sounds like your talking about a bvsv, sits in the thermostat housing with a vacuum line to the MAF sensor tube (not the sensor itself) and the throttle body.

Here's a pic of a BVSV, thanks to Codelicious in another thread:

http://pic20.picturetrail.com/VOL14/.../378136615.jpg

bah. lol guess i wasn't paying attention.

i found what looks like the same deal, from a samurai, would this be inter changaable??
ill take a picture if required but i have checked 5 junkyards and lordco told me they cant help...