Ugh, yet another problem with Natalie...
 

Well, here goes my pr0 slainin skillz lol

My friend noticed that when i press the brakes sometimes either 1 or both sides of brake lights -one side goes out.

Like this... I don't have an SD card reader with me, so I'll post a video later.

I'll just use paint for a quick explanation...


http://i207.photobucket.com/albums/b...tom16/This.png http://i207.photobucket.com/albums/b...m16/that-1.png

Yeah. The lines around the light is for the bright effect. I have plenty of paint skill I just made this really fast haha.

Umm... Any ideas what's shorting out? or a fuse or something?

Haha.... Those paint pics are awesome!

I'd pull the maintenance cover off of the backside of each assembly (plastic cover in hatch area) and pop the bulb holder out (big white thing that holds the bulbs for that particular assembly). You'll notice that the there are little ring terminals that are screwed down into the plastic that act as the ground for the tail lights. Unscrew them and clean up the connection there so that there is no corrosion between the screw and terminal. That will likely fix your issue, as corrosion is very common on the tail lights.

:roflwtf: and :bigthumb:



:bow::grinking:



Best Post ever! WOW!

Yeah.....lol Well, I don't have anything else to do at 2 in the morning haha

So where are you at with the car now? I'm DYING for more illustrations.


Did you happen to get those actuators shipped out?

I haven't yet. Too much on my shoulders atm, I'll try to have it out by Wednesday though..

Haha, umm... Well I just installed a switch for that antenna, it's the same switch that Dominic used on his rx7 in Fast and the Furious lol. It's pretty cool :)

It looks like this --->>

http://i207.photobucket.com/albums/b...m16/switch.png

Wow, that does look great in there! :bow:

Haha, thanks! xD

Go check out my new post... Tell me your thoughts..