Toyota Supra Forums! Join the Supra forum!

Toyota Supra Forums! Join the Supra forum! (http://www.toyota-supra.info/forums/)
-   MKIII Supra (http://www.toyota-supra.info/forums/mkiii-supra/)
-   -   Loud Clicking Noise!! (http://www.toyota-supra.info/forums/mkiii-supra/15106-loud-clicking-noise.html)

Cyto 10-10-2009 06:57 PM

Loud Clicking Noise!!
 
Alright well I recently had the HG replaced, twice. Now that I got it back the 3rd time it has a loud clicking noise near the exhaust manifold. When I do a cold start(its like 60 degrees outside) I see whitish smoke coming out of the top of the engine, I'm not very good with cars, but I do see that above the heads, I'm guessing its the exhaust manifold, it looks like its not on very tight, and I see white smoke coming from it. When I rev the engine it gets louder, and louder. It's not overheating, and the oil isnt milky. I'm so confused!! ahh! help!!!

cre 10-11-2009 03:21 AM

It's possible (see: VERY common) that one or more of the exhaust stud's threads in the head gave up... in which case helicoiling will be required. Hopefully, that's not the case. Did you tighten the nuts on the studs according to spec? 29ft lbs, IIRC? Did you replace the manifold gasket?

Our cars tend to run very rich, so when the car is still warming up you should check if the smoke smells like fuel.

It sounds like an exhaust leak to me as well, the cause is all that remains and pulling the manifold back off is the only real solution.

Cyto 10-11-2009 03:34 AM

Quote:

Originally Posted by cre (Post 73848)
It's possible (see: VERY common) that one or more of the exhaust stud's threads in the head gave up... in which case helicoiling will be required. Hopefully, that's not the case. Did you tighten the nuts on the studs according to spec? 29ft lbs, IIRC? Did you replace the manifold gasket?

Our cars tend to run very rich, so when the car is still warming up you should check if the smoke smells like fuel.

It sounds like an exhaust leak to me as well, the cause is all that remains and pulling the manifold back off is the only real solution.

Yeah, me and a buddy took a look at it today, and the guy who did the HG work screwed up pretty bad, he broke the bolt off in the head, and left a bunch loose. I'm going to wait until Monday and use the Easy-out bits he has in his diesel shop at school. These cars are so weird..


All times are GMT. The time now is 04:38 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87