stripped out exhaust manifold stud

robertsws · 09-17-2009, 10:39 PM

OK so I stripped out the head where one of my exhaust studs bolts in. I just wanted to get some ideas on ways to fix it. I know the proper way to do it I suppose but I am lacking tapping tools, inserts, etc. Anyone got a cheap fix.
It's the centermost stud. dead center.

mirage83 · 09-17-2009, 11:40 PM

Don't do a cheap fix. One of the performance Supra aftermarket suppliers has a good quality kit to replace these bolts as the OEM bolts strip far too easily and far too often. I'll look around and see which place it was which carries them.

robertsws · 09-18-2009, 12:36 AM

Thanks, I found the kit at driftmotion for $70 + $15 for standard UPS shipping.

my89Supra · 07-31-2011, 04:38 PM

I have the same issue - how did the kit from DriftMotion work out for you ? Thanks.

09-17-2009, 10:39 PM	#1
robertsws 3" Exhaust Join Date: May 2008 Location: Gaithersburg, Maryland Posts: 63	stripped out exhaust manifold stud OK so I stripped out the head where one of my exhaust studs bolts in. I just wanted to get some ideas on ways to fix it. I know the proper way to do it I suppose but I am lacking tapping tools, inserts, etc. Anyone got a cheap fix. It's the centermost stud. dead center. __________________ 1991 Supra - Turbo - 5spd 60-1 upgraded turbo Lexus AFM 3" exhaust, 4" tip SAFC 2 550cc injectors (2 sets, venom direct fit, RC engineering) 2.5" intercooler and piping Aluminum radiator w/dual electric fans ARP bolts w/MHG Full-auto turbo timer Fidanza Flywheel & Stage 2 Clutch spark plugs and wires. power steering pump cold temp start switch engine top end rebuilt transmission opened up and inspected at a tranny shop when the flywheel and clutch installed last week.

09-18-2009, 12:36 AM	#3
robertsws 3" Exhaust Join Date: May 2008 Location: Gaithersburg, Maryland Posts: 63	Thanks, I found the kit at driftmotion for $70 + $15 for standard UPS shipping. __________________ 1991 Supra - Turbo - 5spd 60-1 upgraded turbo Lexus AFM 3" exhaust, 4" tip SAFC 2 550cc injectors (2 sets, venom direct fit, RC engineering) 2.5" intercooler and piping Aluminum radiator w/dual electric fans ARP bolts w/MHG Full-auto turbo timer Fidanza Flywheel & Stage 2 Clutch spark plugs and wires. power steering pump cold temp start switch engine top end rebuilt transmission opened up and inspected at a tranny shop when the flywheel and clutch installed last week.

07-31-2011, 04:38 PM	#4
my89Supra Stock Join Date: Jul 2011 Location: Pa Posts: 4	Curious about results I have the same issue - how did the kit from DriftMotion work out for you ? Thanks.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
White smoke from exhaust manifold	Rommy	MKIII Supra	15	07-26-2009 06:32 PM
Non Turbo JZA80 Exhaust Manifold	SupraJAZ	MKIV Supra	3	04-19-2007 12:19 PM

09-17-2009, 11:40 PM	#2
mirage83 12psi boost Join Date: Feb 2007 Location: Georgia Posts: 359	Don't do a cheap fix. One of the performance Supra aftermarket suppliers has a good quality kit to replace these bolts as the OEM bolts strip far too easily and far too often. I'll look around and see which place it was which carries them.