Blown Head Gasket
 

So I took my head to the machine shop Ive removed the cams, The machine shops going to check for cracks, put my new valve seals in, do a valve job and reseating valves, going to surface the head and do the cleaning.
Questions:
1.) Does any one know the tourqe for the installation of the cams?
2.) All that is going to run me about 210. usd does that sound fair. He usallly charges me 50, 60 bucks for cleaning checking and resurfaceing. The guys pretty good. Hes done all my head work just curious what other people have paid for this.

torque bearing caps (things that hole the cams) to 14ft-lb... make sure you do it in proper sequence
heres a link that may be useful
http://cygnusx1.net/Supra/Library/TS...aspx?S=EM&P=52

Thanks for the link Ive got to bookmark this, soon as college starts I can use alldata again which rocks but this looks as good.

here are a few other good bookmarks

Parts numbers refernce.
http://www.toyodiy.com/parts/q.html

good how-to's
http://www.supramania.com/forums/articles.php?c=158

http://gallery.sanitylapse.com/v/supra/

http://www.supras.com/06/techcenter/techtips.php

again thanks, Ill prob post some pics as soon as I get everything clean so far everything looks good not alot of ware anywhere.

Valve Covers repainted
 

Just some pics, My heads taken forever they head to take fourteen thousands off and theyre still doing the valve job hopefully next weeend ill have everything back together all the parts are here and mostly clean but I thought since I had the extra time why not paint the VCs I used High temp paint to paint them, 500f and for the accents I used acrylic Ill keep everyone informed if it dosent last. Also some pics of injectors after clean Ill post more pics as I finish every thing up try to get some of block and deffintly head when I get it back.

nice haha. i wish i wasnt lazy to paint.

I wouoldnt have paited them but the machine shops taking to long with my head and I had extra time. I got them both done now they look awsome. I cant wait to see them on the car with the intake blocking them lol.

not as bad as mine. i got coil packs and intake covering everything

Allright Heads back from machine shop, everything looks good put cams and everything back into head already and hopefully tomorrow I can start putting this beast back together.