|
![]() |
#1 |
Intake
Join Date: Apr 2009
Location: Bristol VA
Posts: 33
![]() |
![]()
Its white with no smell at all. No plugs are brown. This car sucks lol.
|
![]() |
![]() |
![]() |
#2 |
3" Exhaust
Join Date: May 2009
Location: Denver
Posts: 104
![]() |
![]()
Ok, then that means that your getting antifreeze in your cylinders some how, you might have a small leak in your head gasket and needs to be changed out. When the fuel mixes with antifreeze it produces a white smoke or steam from the exhaust. Check your antifreeze to see if you have any mixture of oil there in your coolant and check the oil filler cap and the dipstick also for any thing that looks brown or dark chocolate in color. But ultimately that's what's wrong is a BHG.
__________________
Cold Air Intake MIZU Aluminum Radiator Ralco RZ Underdrive Pulley NGK Wires and Plugs Hi Flow CAT MR Muffler Super Coil Techna Fit Brake lines Clear Corner Turn Signal Lens Projector Head Lights Evo Fog Lights Evo Body Kit Soon ---> 3'' Exhaust ![]() |
![]() |
![]() |
![]() |
#3 |
Intake
Join Date: Apr 2009
Location: Bristol VA
Posts: 33
![]() |
![]()
I changed the oil when I started to first notice it, nothing milky, white or anything. I don't know what else it could be.
|
![]() |
![]() |
![]() |
#4 |
Stock
Join Date: Mar 2009
Location: Maryland
Posts: 27
![]() |
![]()
i would put money on it being a blown head gasket. buy ARP headstuds to bolt the new gasket down and never have to worrie again
|
![]() |
![]() |
![]() |
#5 |
Intake
Join Date: Apr 2009
Location: Bristol VA
Posts: 33
![]() |
![]()
Yeah, its a bhg. I let her run just a bit ago for about 35 mins, and its started running very very hut. Gonna start taking the motor apart on weds. I know its gonna suck lol. I have no idea what I'm going to be doing lol. Its going to cost way to much to take it to someone. The only thing I'm worried about is the timing being a issue.
|
![]() |
![]() |
![]() |
#6 |
3" Exhaust
Join Date: May 2009
Location: Denver
Posts: 104
![]() |
![]()
You should look up some threads about blown head gaskets in the forum there is one especially from Ihatehacks http://www.toyota-supra.info/forums/...ir-w-pics.html it's a long thread but pretty detailed along with pictures, that should get you started. And also if you have any more questions feel free to ask.
![]()
__________________
Cold Air Intake MIZU Aluminum Radiator Ralco RZ Underdrive Pulley NGK Wires and Plugs Hi Flow CAT MR Muffler Super Coil Techna Fit Brake lines Clear Corner Turn Signal Lens Projector Head Lights Evo Fog Lights Evo Body Kit Soon ---> 3'' Exhaust ![]() Last edited by 86.5 7MGE; 05-24-2009 at 04:11 AM. |
![]() |
![]() |
![]() |
#7 |
Intake
Join Date: Apr 2009
Location: Bristol VA
Posts: 33
![]() |
![]()
Hey guys. So when I take the head off do I need to remove the timing belt or not need to fool with any of the belts? I've got the left side completely apart, gonna work on the fuel side tomorrow. Its not as bad as I was thinking it would be. Everything came apart fairly easy with it being a new block and all. If I can get some advice on that part it would be most appreciate
![]() |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lost and Confused | mkiiisupra | MKIII Supra | 7 | 12-30-2007 07:21 PM |
Confused about gear box. plz help ASAP | ADZ23 | MKIV Supra | 1 | 12-01-2006 12:18 PM |
Can't adjust timing... | Lunch2000 | MKIII Supra | 7 | 11-26-2006 04:09 AM |
Man...Confused | Poptart | Non-Generation Specific Questions | 2 | 06-27-2006 07:47 PM |
confused | localreeper | Non-Generation Specific Questions | 3 | 10-07-2005 12:25 PM |