Wheel bearing question

TurboSupera · 03-11-2009, 09:26 PM

Quote:

Originally Posted by suprabahamut

I searched around and have not found this yet. But what would happen if a wheel bearing goes bad, or worse seizes up? I have noticed that when I am driving that the wheels squeal a little bit, and turning even louder. I raised it an turned the wheel while in the air and it squealed. The brakes are new, So I think it is the wheel bearing. I don't have the money to replace them yet, so I wanted to know what would happen if they seize, or is it rare. Also Are they only in the front wheels?

When you say the brakes are new do you mean the brake pads? OEM? Did you have the rotors re-surfaced? Just a thought.

Bill UK · 03-11-2009, 10:00 PM

Good point TurboSupera, and did you fit the pads yourself ? Are the anti squeal shims and springs fitted correctly?

suprabahamut · 03-12-2009, 01:17 AM

Yeah the brake pads are new and the rotors were resurfaced too. I am going to recheck the bearing, I forgot to move the wheel and check for play. But the pads are organic it might be them. I was just worried about the bearing, because when I bought the car about 2 years ago it sat since 2000 with flat tires, and in the grass. So I wanted to know what would be the worse case if the bearing did fail. Thanks guys I am going to get on it once the rain goes away.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Supra space saver wheel question	aquanuke	Non-Generation Specific Questions	0	03-25-2008 10:24 PM
Question concerning disasembling steering wheel	Chambers	MKIII Supra	2	10-14-2007 03:40 PM
Wheel Bearing trouble	Jason Van Dyk	Non-Generation Specific Questions	1	01-10-2007 02:17 AM
Steering wheel question!	lifesnotfair	Non-Generation Specific Questions	0	01-14-2006 02:32 AM
rear wheel bearing interchange	wambus	MKIII Supra	1	08-20-2005 05:54 AM

03-11-2009, 10:00 PM	#2
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	Good point TurboSupera, and did you fit the pads yourself ? Are the anti squeal shims and springs fitted correctly?

03-12-2009, 01:17 AM	#3
suprabahamut 3" Exhaust Join Date: May 2007 Location: greensboro Posts: 242	Yeah the brake pads are new and the rotors were resurfaced too. I am going to recheck the bearing, I forgot to move the wheel and check for play. But the pads are organic it might be them. I was just worried about the bearing, because when I bought the car about 2 years ago it sat since 2000 with flat tires, and in the grass. So I wanted to know what would be the worse case if the bearing did fail. Thanks guys I am going to get on it once the rain goes away.