Pressure Hose on Power Steering, first Supra and first post here.

[ddouglas77]

Originally Posted by Chambers

The best way would be jack it up and put jack stands in the correct places on either side of the car. After that I think you will need a few large wrenches, I think anywhere between 17mm and 21mm, I can't remember exactly. Also a 10mm socket to remove a bracket for the lines.

If you got the hose from Driftmotion, then you will have to wrestle it a little to get it to work, but I will fit fine, may be good to have a friend help.

Also make sure to refill the reservoir with Dextron II or III auto tranny fluid when finished.

Good luck.

Yes, it is from driftmotion. Mobil 1 ATF fluid OK to use?