88 to 89 convertion
 

How difficult would it be to put 89 tail lights spoiler and front bumper (Would the bumper match the rest of the 88 body?) on a 88 supra? I'm thinking of converting my 88 because i like the style of 89 but i couldn't find one that wasnt a piece or totally wrecked, plus when i tooked the 88 i bought for the first time i knew i had to buy her. If theres any guides out for this kind of things i would be truely greatful.

depending on where you are the differences can either be a lot or nothing at all. USDM supras don't have much difference if I remember correctly. Other countries have stark differences in the bodies. Here in the US, everything you want to do is just a matter of unbolting and bolting back on the parts you want. I am about to put an 89 or 90 front bumper skin on my 87 and it just bolts right on. Pretty much everything is interchangeable on the MA70 chassis.

Mines a Canadian Model. I'm hopeing its a direact bolt on. Can i get these parts from toyota or am i going to have to find a 89-92 parts car.

check with your local toyota dealership. Some parts may still be available. Most likely you will need a parts car.

From what I have been told the 89+ tails will bolt on to a pre 89. The only catch is that you have to "egg" some of the holes out to let the studs on the 89+ tails go through.

Good luck.

egg as in wat? Drill halfway though making it a easier "plug in"?

In my experience it's a machinist term for a screw up while drilling a hole, lol. The drill bit goes in at a incorrect angle or walks and when its finished it doesn't leave a strait perfect hole. It looks as if it was more of a oval then a circle.

So you will just have to drill out some of the holes to get the studs through.

Hope this helps, good luck.