Oil feed to Turbo thread size?

SideWinderGX · 07-29-2008, 12:50 PM

LOL I didn't scroll the page down

Thank you, I'm gonna order today most likely haha.

mkiiisupra · 07-29-2008, 12:55 PM

no problem i opted to make my own lines but the kit certainly makes it easier

AZP sells the drain block flange.. and Driftmotion Garage >> Welcome sells mdc's turbo drain/feed flange

and then you can make your own lines from aeroquip or who ever else

SideWinderGX · 07-29-2008, 01:41 PM

I thought I was limited to MDC's kit honestly, but as they aren't selling one of the flanges anymore I was stuck.

RabidChimp's kit...that tiny piece in the center of the picture threads into where the banjo bolt is now, for the smaller line? That's the only place I can see it fitting, but it certainly seems small.

mkiiisupra · 07-29-2008, 04:23 PM

its only a -4an fitting for the oil feed.

It threads into the silver flange to the left of it. and if u can see on the end of the -4an oil line that threads into the block

Either that way or vice versa heh

SideWinderGX · 07-29-2008, 06:13 PM

Aha, I see it now. Thank you

07-29-2008, 12:50 PM	#1
SideWinderGX 3" Exhaust Join Date: Feb 2007 Location: Syracuse, NY Posts: 203	LOL I didn't scroll the page down Thank you, I'm gonna order today most likely haha. __________________ my car: 1987 brownish Toyota Supra Turbo, automatic 7MGTE engine with ~100k miles on it.

07-29-2008, 12:55 PM	#2
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: Las Vegas, NV Posts: 570 Blog Entries: 1	no problem i opted to make my own lines but the kit certainly makes it easier AZP sells the drain block flange.. and Driftmotion Garage >> Welcome sells mdc's turbo drain/feed flange and then you can make your own lines from aeroquip or who ever else __________________ 1990 Toyota Supra Turbo A/T ------------------------------------------------ Questions about oil? take a look http://www.supramania.com/aehaas/

07-29-2008, 01:41 PM	#3
SideWinderGX 3" Exhaust Join Date: Feb 2007 Location: Syracuse, NY Posts: 203	I thought I was limited to MDC's kit honestly, but as they aren't selling one of the flanges anymore I was stuck. RabidChimp's kit...that tiny piece in the center of the picture threads into where the banjo bolt is now, for the smaller line? That's the only place I can see it fitting, but it certainly seems small. __________________ my car: 1987 brownish Toyota Supra Turbo, automatic 7MGTE engine with ~100k miles on it.

07-29-2008, 04:23 PM	#4
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: Las Vegas, NV Posts: 570 Blog Entries: 1	its only a -4an fitting for the oil feed. It threads into the silver flange to the left of it. and if u can see on the end of the -4an oil line that threads into the block Either that way or vice versa heh __________________ 1990 Toyota Supra Turbo A/T ------------------------------------------------ Questions about oil? take a look http://www.supramania.com/aehaas/ Last edited by mkiiisupra; 07-29-2008 at 04:25 PM.

07-29-2008, 06:13 PM	#5
SideWinderGX 3" Exhaust Join Date: Feb 2007 Location: Syracuse, NY Posts: 203	Aha, I see it now. Thank you __________________ my car: 1987 brownish Toyota Supra Turbo, automatic 7MGTE engine with ~100k miles on it.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP PLEASE	Nick0887	Non-Generation Specific Questions	4	02-28-2009 07:26 AM
Dream Offer	Karma_Supra	MKIV Supra	22	10-17-2007 03:04 PM
What turbo SIZE???!	Seanchp	Non-Generation Specific Questions	0	10-05-2006 06:44 PM
Sequential Turbo Question	suprapoweredsoarer	MKIV Supra	1	06-06-2006 12:13 AM