Changing head gasket questions???

linuxgurupodboy · 02-13-2008, 05:59 AM

I just removed the head from my 7m and this is what I saw. It looks embarrassingly horrible. If anyone knows or thinks they know where it may have came from I'm all ears.

Paul[IMG]file:///C:/Documents%20and%20Settings/paul/Desktop/13022008%28005%29.jpg[/IMG][IMG]file:///C:/Documents%20and%20Settings/paul/Desktop/13022008%28003%29.jpg[/IMG]

rayshawn.434 · 02-13-2008, 09:12 AM

i cant see a good pic of it but is all the pistions like that?

linuxgurupodboy · 02-13-2008, 09:31 AM

Yeah, it feels like a sandy gritty substance, comes off easy.

rayshawn.434 · 02-13-2008, 09:49 AM

if it black its just carbon build up i would just clean it off and dont worry about it. as long as it did not do any damage to the pistions like deep cuts

j3pz · 02-13-2008, 01:46 PM

nfi what it is. didnt come over the bottom of the head did it? is it metalic?

Pretaco · 02-13-2008, 04:27 PM

What were the syptoms before you took the head off?

What does the bottom of the head look like?

From those pics, I would say look at the cylinder walls closely for vertical scratches, and see if the crosshatching pattern is still visable in any of them.

I would also suspect that the head gasket was bad between the #5 & 6 cylinders from the clean spot between those cylinders, but the #6 piston still has carbon build up, so no coolant was getting in there.

But those pics are pretty crappy to be honest.

Ray.

linuxgurupodboy · 02-13-2008, 06:05 PM

Sorry guys bout those pics, will get better ones tonight.

I was driving from Auckland to Hamilton, bout 200 kilometres. 3/4 the way down I ran out of water, temp got right up there. Anyway filled it back up slowly while engine was running. I was driving home from work the other week 30 kilometres and temp got right up there again, but once I got the radiator cap off, found it still was 3/4 fill. Once filled up, I noticed small air bubbles surfacing from radiator while enigne was idling.

Pretaco · 02-13-2008, 06:16 PM

Are any of the pistons or cylinders or valves much cleaner than the others?

The coolant leaking into the combustion chamber will usually clean whichever cylinder that is bad, but maybe not if it was a small break and you didn't drive on it very much.

Pics of the bottom of the head, or of the gasket itself might help. Only if you were careful while removing the gasket.

Ray.

linuxgurupodboy · 02-18-2008, 04:46 AM

I finally got round to taking more pictures, hopefully these will be good enough to make judgement. I just turned the head over for the first time to inspect it and found two inlet valves had some type of strands of grey fibre or linen stuck in it, could it be part of the head gasket?

ddmcse · 02-21-2008, 01:24 AM

what distro do you use ?

02-13-2008, 05:59 AM	#1
linuxgurupodboy Intake Join Date: May 2007 Location: New Zealand Posts: 30	Changing head gasket questions??? I just removed the head from my 7m and this is what I saw. It looks embarrassingly horrible. If anyone knows or thinks they know where it may have came from I'm all ears. Paul[IMG]file:///C:/Documents%20and%20Settings/paul/Desktop/13022008%28005%29.jpg[/IMG][IMG]file:///C:/Documents%20and%20Settings/paul/Desktop/13022008%28003%29.jpg[/IMG] Attached Thumbnails __________________ 1990 3.0Ltr GT Turbo @8psi Manual (Converted)

02-13-2008, 09:31 AM	#3
linuxgurupodboy Intake Join Date: May 2007 Location: New Zealand Posts: 30	Yeah, it feels like a sandy gritty substance, comes off easy. __________________ 1990 3.0Ltr GT Turbo @8psi Manual (Converted)

02-13-2008, 06:05 PM	#7
linuxgurupodboy Intake Join Date: May 2007 Location: New Zealand Posts: 30	Sorry guys bout those pics, will get better ones tonight. I was driving from Auckland to Hamilton, bout 200 kilometres. 3/4 the way down I ran out of water, temp got right up there. Anyway filled it back up slowly while engine was running. I was driving home from work the other week 30 kilometres and temp got right up there again, but once I got the radiator cap off, found it still was 3/4 fill. Once filled up, I noticed small air bubbles surfacing from radiator while enigne was idling. __________________ 1990 3.0Ltr GT Turbo @8psi Manual (Converted)

02-13-2008, 06:16 PM	#8
Pretaco 3" Exhaust Join Date: Dec 2007 Location: Glendale, AZ Posts: 126	Are any of the pistons or cylinders or valves much cleaner than the others? The coolant leaking into the combustion chamber will usually clean whichever cylinder that is bad, but maybe not if it was a small break and you didn't drive on it very much. Pics of the bottom of the head, or of the gasket itself might help. Only if you were careful while removing the gasket. Ray. __________________ '88 Supra Targa 5 speed w/ '90 7M-GTE Currently Running Good For Sale: Light blue body parts, Blue interior parts all from '90 supra targa turbo manual. Also for sale: R154 trans, brake pedal, master cylinder, booster, abs actuator, sensors, abs ecu, driveshaft, 3.90 lsd rear end, radiator, wiring, speedo cable, 8 saw blade wheels, '88 ecu, relays, cruise control actuator (bad cable), empty fuel tank, etc....

02-18-2008, 04:46 AM	#9
linuxgurupodboy Intake Join Date: May 2007 Location: New Zealand Posts: 30	I finally got round to taking more pictures, hopefully these will be good enough to make judgement. I just turned the head over for the first time to inspect it and found two inlet valves had some type of strands of grey fibre or linen stuck in it, could it be part of the head gasket? Attached Thumbnails __________________ 1990 3.0Ltr GT Turbo @8psi Manual (Converted) Last edited by linuxgurupodboy; 02-18-2008 at 05:04 AM.

02-13-2008, 09:12 AM	#2
rayshawn.434 Stock Join Date: Feb 2008 Location: Danville Posts: 7	i cant see a good pic of it but is all the pistions like that?

02-13-2008, 09:49 AM	#4
rayshawn.434 Stock Join Date: Feb 2008 Location: Danville Posts: 7	if it black its just carbon build up i would just clean it off and dont worry about it. as long as it did not do any damage to the pistions like deep cuts

02-13-2008, 01:46 PM	#5
j3pz 500whp yet? Join Date: Nov 2005 Location: Mechanicsville, MD, US of A, 20659 Posts: 1,060	nfi what it is. didnt come over the bottom of the head did it? is it metalic? __________________ 88 N/A w/ 5spd - stock - not running, bhg 87 turbo/targa w/ 5spd- fidanza light weight flywheel, new oem slave cylinder, apexi air filter, no ac and no heat

02-13-2008, 04:27 PM	#6
Pretaco 3" Exhaust Join Date: Dec 2007 Location: Glendale, AZ Posts: 126	What were the syptoms before you took the head off? What does the bottom of the head look like? From those pics, I would say look at the cylinder walls closely for vertical scratches, and see if the crosshatching pattern is still visable in any of them. I would also suspect that the head gasket was bad between the #5 & 6 cylinders from the clean spot between those cylinders, but the #6 piston still has carbon build up, so no coolant was getting in there. But those pics are pretty crappy to be honest. Ray. __________________ '88 Supra Targa 5 speed w/ '90 7M-GTE Currently Running Good For Sale: Light blue body parts, Blue interior parts all from '90 supra targa turbo manual. Also for sale: R154 trans, brake pedal, master cylinder, booster, abs actuator, sensors, abs ecu, driveshaft, 3.90 lsd rear end, radiator, wiring, speedo cable, 8 saw blade wheels, '88 ecu, relays, cruise control actuator (bad cable), empty fuel tank, etc....

02-21-2008, 01:24 AM	#10
ddmcse 500whp yet? Join Date: Jun 2005 Location: CT U.S.A. Posts: 966	what distro do you use ? __________________ 300+ RW HP Dyno run, jdm,mod turbo,3"exh,electfan,greddyboost Blown HeadGasket info My Supra KiXGaS

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1989 Supra blown head gasket	rayk5799	Non-Generation Specific Questions	6	05-18-2009 10:51 AM
hks head gasket	suprabahamut	MKIII Supra	8	09-01-2007 04:28 AM
Head Gasket replacement questions.	DavidLeClair584	MKIII Supra	1	06-09-2007 09:17 PM
Buying a 87, head gasket questions	Gengus	MKIII Supra	1	04-14-2007 07:15 PM
7MGE - Stuck with changing Head Gasket???	pasupra	MKIII Supra	8	07-31-2006 10:41 AM