How hard is the clutch master cylinder to replace?

the#1 · 03-09-2007, 04:24 PM

Hey all, I'm looking at a '83 with 267,000 miles that needs the clutch master replaced. I was wondering if it is an easy job. It seems like it should be fairly straightforward-

Is the slave easy to get at to bleed the system? Could the master have taken out the slave too? (like from dirt and debris)

Thanks for any help- I'd be so stoked if I could get this car! its got a LS diff!

mrnickleye · 03-10-2007, 03:11 AM

They both are easy to replace. I've done about 20 of each, back in the days at the dealer.

I'd go ahead and change them both, to "start out" good.

Just be VERY aware of this.........

The car is old ! You will be putting LOTS of $$$$ into it in the first year!!!

dilevan · 05-27-2016, 04:32 AM

I have a 1990 Supra turbo that needs clutch master and slave cylinders replaced. They JUST were replaced a few months back. What do you think went wrong? They weren't replaced at the same time. Could that matter?

03-10-2007, 03:11 AM	#2
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	They both are easy to replace. I've done about 20 of each, back in the days at the dealer. I'd go ahead and change them both, to "start out" good. Just be VERY aware of this......... The car is old ! You will be putting LOTS of $$$$ into it in the first year!!! __________________ Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08.

05-27-2016, 04:32 AM	#3
dilevan Stock Join Date: May 2016 Location: Jasper, Alabama Posts: 3	Clutch master/slave cylinder I have a 1990 Supra turbo that needs clutch master and slave cylinders replaced. They JUST were replaced a few months back. What do you think went wrong? They weren't replaced at the same time. Could that matter?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch Master Cylinder question. 1989 Supra.	PFlanagan	MKIII Supra	4	08-07-2008 08:20 PM
Clutch Master Cylinder Help please!!	ebang	MKIII Supra	5	05-13-2007 05:36 PM
Maintenance brake and clutch master cylinder fluid	IHateHacks	MKIII Supra	1	04-18-2007 07:15 PM

03-09-2007, 04:24 PM	#1
the#1 Stock Join Date: Oct 2006 Location: Junction City, Oregon Posts: 3	How hard is the clutch master cylinder to replace? Hey all, I'm looking at a '83 with 267,000 miles that needs the clutch master replaced. I was wondering if it is an easy job. It seems like it should be fairly straightforward- Is the slave easy to get at to bleed the system? Could the master have taken out the slave too? (like from dirt and debris) Thanks for any help- I'd be so stoked if I could get this car! its got a LS diff!