|
![]() |
#1 | |
3" Exhaust
Join Date: Apr 2011
Location: redhill surrey uk
Posts: 142
![]() |
![]() Quote:
I'm grabbing for info to try a long distance diagnosis here . |
|
![]() |
![]() |
![]() |
#2 |
Stock
Join Date: Mar 2013
Location: Chico, CA
Posts: 6
![]() |
![]()
a little hesitation when punching it, just pulled the plugs, they are brand new but very black at the connection.. the thermostat didnt get hot no.. and thank you for your help.
|
![]() |
![]() |
![]() |
#3 |
Stock
Join Date: Mar 2013
Location: Chico, CA
Posts: 6
![]() |
![]()
yeah, and even when i spray starter fluid in intake, no start...
|
![]() |
![]() |
![]() |
#4 |
Stock
Join Date: Mar 2013
Location: Chico, CA
Posts: 6
![]() |
![]()
is it compression??? maybe rings? please tell me no lol.
|
![]() |
![]() |
![]() |
#5 |
3" Exhaust
|
![]()
compression test will tell you there, stock compression should be between 175-180 psi. Could also be your cold start injector or your cold start injector switch which is I believe the brown sensor on the thermostat housing, I've been having a similar problem and was told that would be the main culprit.
__________________
Officially joined the V-Dub club ![]() |
![]() |
![]() |
![]() |
#6 |
Stock
Join Date: Mar 2013
Location: Chico, CA
Posts: 6
![]() |
![]()
i can get it started , but its definitely running way rich, pull the brand new plugs and they are wet, runs great when started. coolant temp sensor? cold start injector? input appreciated so much guys. thankyou
|
![]() |
![]() |
![]() |
#7 |
Official hall monitor / search nazi - NO SOUP FOR YOU!
Join Date: Oct 2009
Location: Canada, BC
Posts: 837
![]() |
![]()
http://www.cygnusx1.net/Supra/Librar...ection=FI&P=22
your computer has a constant current going to it through terminal BATT and it keeps a small memory. use the link i posted above to connect T and E1 on the ECU to start diagnostic mode. check for codes and report back. make sure you are getting spark and fuel. remove a plug and ground it on the head and have some one turn it over. ensure your getting fuel. test your cold start injector: http://www.cygnusx1.net/Supra/Librar...ection=FI&P=71 also test your injectors: http://www.cygnusx1.net/Supra/Librar...aspx?S=FI&P=50 http://www.cygnusx1.net/Supra/Librar...ection=FI&P=53 if further inspecti0on is required listn for fuel entering the tank. your pressure regulator may not be working properly. check for vacuum leaks to the FPR and possibly check the pressure on the rail: http://www.cygnusx1.net/Supra/Librar...aspx?S=FI&P=46 it sounds spark related to me because if you sprayed fuel in the intake it should have sparked up assuming your timing is close enough. maby check to see your ign coil and igniter are within manual specs still. check your fuses.
__________________
1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft. |
![]() |
![]() |
![]() |
#8 |
3" Exhaust
Join Date: Apr 2011
Location: redhill surrey uk
Posts: 142
![]() |
![]()
Hi! - Ok . so the engine starts now , Question: , How long are you running the engine ? -long enough to get the thermostat to open ? . When the engine is warmed up from cold , the mixture should weaken and run smoothly ( this may take a few minutes ! ) . The plugs should then be a brownish colour , Black ( sooty ) plugs are a sign of richness , white plugs are too weak , more feedback info please .
|
![]() |
![]() |
![]() |
|
|