please help

chrism8799 · 03-16-2008, 06:47 PM

please help me i cant figure out why this 1983 supra wont start i am getting no spark i have a replacement coil and igniter on it and still nothing any help would be great please

Supra Goddess · 03-17-2008, 02:00 AM

Check your fuses. The ones in the fuse box near the battery AND the fuses in the drivers side kick panel. There's an ignition fuse in the kick panel that will make it not start. Also, make sure the ignitor is grounded properly and the other grounds are good too (ground from engine block to battery, ground from transmission to chassis, ground from back of head to chassis, ground from the wiring harness to a bolt on the intake manifold...it's on the underside of the manifold)

supramacist · 05-19-2008, 06:57 AM

Did you have to build your wires? If so did you do it correctly?
Are they still fastened?

What plugs and wires are you running?
Have you looked at the dizzy and the rotor and all of that?

03-16-2008, 06:47 PM	#1 (permalink)
chrism8799 Stock Join Date: Mar 2008 Location: washington Posts: 3	please help please help me i cant figure out why this 1983 supra wont start i am getting no spark i have a replacement coil and igniter on it and still nothing any help would be great please

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-17-2008, 02:00 AM	#2 (permalink)
Supra Goddess Intake Join Date: Feb 2005 Location: Lakewood, WA Posts: 37	Check your fuses. The ones in the fuse box near the battery AND the fuses in the drivers side kick panel. There's an ignition fuse in the kick panel that will make it not start. Also, make sure the ignitor is grounded properly and the other grounds are good too (ground from engine block to battery, ground from transmission to chassis, ground from back of head to chassis, ground from the wiring harness to a bolt on the intake manifold...it's on the underside of the manifold)

05-19-2008, 06:57 AM	#3 (permalink)
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,358	Did you have to build your wires? If so did you do it correctly? Are they still fastened? What plugs and wires are you running? Have you looked at the dizzy and the rotor and all of that?