|
![]() |
#1 |
Stock
Join Date: Jun 2007
Location: NY
Posts: 13
![]() |
![]()
youl'l be needing tons of hardwork and patience in preping up the car for painting. the secret of a good paint job is on the preparation of the body.
|
![]() |
![]() |
![]() |
#2 |
3" Exhaust
Join Date: Jul 2005
Location: perth west aussie
Posts: 75
![]() |
![]()
here is a few pics of my effort before and after. Mine took 150 hours and as you can see the body and paint were very good before i started. I did mine in Artic pearl white, a zerallic pearl used on 2003-2006 subaru imprezas and wrx's. It's a massive job if you want to do it propperly. I did all the prep work at a mates panel shop but i left the painting to the proffesionals. You gotta know what your doing before you try the job on your own. I dont think just owning a compressor is enough
__________________
1jz scramjet mkiii |
![]() |
![]() |
![]() |
#3 |
Lexus & 550's
Join Date: Sep 2005
Location: Illinois
Posts: 521
![]() |
![]()
when your painting im pretty sure you have to be in a dust free environment with proper air circulation. i think it also matters how much pressure you put through the gun
__________________
91 N/A automatic supra;K&N FIPK;2.5" custom exhaust;no cat;pacesetter header;eibach springs;tokico "blues";MKIV TT rims |
![]() |
![]() |
![]() |
#4 |
3" Exhaust
Join Date: Jul 2006
Location: connecticut
Posts: 92
![]() |
![]()
when you are painting you have to be in a climate controlled room with little humidity. you need to buy paint the right hardner for the kind of paint and the right thinner. everything needs to be mixed right with the right air pressure and the right motions to paint. if you mix it wrong you will have orange peel and wont look good.you have to spray evenly or youll have runs. if you do enough layers it doesnt matter how good you paint it if you have enough patience to wetsand it which is a pain in the ass then buff it
|
![]() |
![]() |
![]() |
#5 |
3" Exhaust
Join Date: Dec 2007
Location: Glendale, AZ
Posts: 126
![]() |
![]()
Haven't tried this yet but interesting:
moparts: paint job on a budget!? another thread about it: Sweet $50 paint job - Pirate4x4.Com Bulletin Board I want to try it one day on my beater truck.
__________________
'88 Supra Targa 5 speed w/ '90 7M-GTE ![]() Currently Running Good ![]() ![]() ![]() For Sale: Light blue body parts, Blue interior parts all from '90 supra targa turbo manual. Also for sale: R154 trans, brake pedal, master cylinder, booster, abs actuator, sensors, abs ecu, driveshaft, 3.90 lsd rear end, radiator, wiring, speedo cable, 8 saw blade wheels, '88 ecu, relays, cruise control actuator (bad cable), empty fuel tank, etc.... |
![]() |
![]() |
![]() |
#6 |
3" Exhaust
Join Date: May 2007
Location: santa barbara
Posts: 56
![]() |
![]()
yea, i used behr house paint and rolled it on... i did that like 8 months ago and im still not done sanding, although im procrastinating most of it.. but it got the job done and it was only like 50 bucks
__________________
1989 supra turbo automatic soon to become a manual K&N, megan dp, gutted cat, 2 1/2" magnaflow cat back NA intake cam, shimmed actuator no A/C or P/S, therefore no ac condensor, compressor and no ps pump or resivior. gutted interior, 4 tweeters, 2 kicker 12"s powered by an MTX 400W 350rms and an audiobahn 400W 300rms |
![]() |
![]() |
![]() |
#7 |
Stock
Join Date: Apr 2008
Location: arizona
Posts: 5
![]() |
![]()
The DIY Paint job > they have a nice layout of how to do it.
|
![]() |
![]() |
![]() |
#8 |
3" Exhaust
Join Date: Aug 2008
Location: melrose, ma
Posts: 108
![]() |
![]() |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
painting my grill? | newbsupra | MKIII Supra | 18 | 09-03-2006 12:55 AM |
Painting my rims? | OmeGa | MKIII Supra | 2 | 07-26-2006 02:39 PM |
Painting My Mouldings.. | newbsupra | MKIII Supra | 2 | 07-13-2006 07:44 AM |
Painting my 87' Supra | Poptart | Non-Generation Specific Questions | 1 | 06-26-2006 09:45 PM |
Painting Interior | Johnny boy 82 | MKIII Supra | 2 | 06-09-2006 03:09 AM |