Wilwood MKIII Rear brake kit
 

Here you go guys, I finally got all parts back from the machine shop and some from Wilwood. I finally have a set of matching rear brakes for the MKIII Supra. Again Just like before this is a bolt on kit all you need is brake fluid and the proper tools.
The introductory price is $995 plus shipping and handling.

The kit includes
2, 12 inch x 1.25 thick Wilwood rotors
2, Rotor hats, the center piece (These will include all the grade 8 fasteners)
2, Wilwood 4 piston "forged" Superlite Calipers
2, Caliper brackets and "press fit" threaded inserts
2, Brake lines "braided stainless steel"
4, Brake pads, Wilwood Street Compound = low dust = excellent cold performance
and all required fasteners to complete the install.


This price reflects no Line Lock or Proportioning valve. Proportioning valves are not required on ABS vehicles and a Line Lock is optional also. Right now the only provision for a parking brake is a line lock.

I am working on a design to retain the parking brake and will update this first post to reflect it and start a new one also. The good news is the parking brake design is completely retrofitable and will not discard any of the parts you purchase with this rear kit. You wont have to buy anything you wont use if you want to include the parking brake option later.

Right now I have all of the hard to get parts in stock I am still waiting on a shipment from Wilwood and I can pretty much guarantee I cannot ship it in time for Christmas but I will do my best if you have to have it by then.

Heres a link to the front brakes

Heres some photos
http://img487.imageshack.us/img487/3...1resizelk7.jpg

http://img257.imageshack.us/img257/7...4resizepz0.jpg

http://img479.imageshack.us/img479/1...5resizejc4.jpg

http://img136.imageshack.us/img136/1...4resizeza7.jpg