new 5m build!

CanadianBak'inSupra · 12-10-2011, 05:10 PM

there is noticeable scratching below the rings, going to see if i can just have them cleaned up maby polished.
i found lots of pistons on this site:
http://www.suprasport.com/Wiseco-Pistons_p_766.html
this particular set seems to come with rings and wrist pins and even the option of standard or .020 or .040 over sized for a whopping 700$ and im sure thats without shipping...

on a side note i found cams:
http://www.gude.com/Products/camlist.php#toyota
head down to the bottem and there they are....

Camshaft 82-88 Toyota Cressida / Supra DOHC 6 Cyl – 5MGE

PART NO: TYCS03
DESCRIPTION: Pulls from 400 to redline.
POWER BAND: 3800 R.P.M. to 7600 R.P.M.
IDLE: (Good)
SPECIFICATIONS: Intake: LIFT – 0.272 DURATION – 268
Exhaust: LIFT – 0.272 DURATION – 268

i sent an email asking for cost with shipping..

12-10-2011, 05:10 PM	#4
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	there is noticeable scratching below the rings, going to see if i can just have them cleaned up maby polished. i found lots of pistons on this site: http://www.suprasport.com/Wiseco-Pistons_p_766.html this particular set seems to come with rings and wrist pins and even the option of standard or .020 or .040 over sized for a whopping 700$ and im sure thats without shipping... on a side note i found cams: http://www.gude.com/Products/camlist.php#toyota head down to the bottem and there they are.... Camshaft 82-88 Toyota Cressida / Supra DOHC 6 Cyl – 5MGE PART NO: TYCS03 DESCRIPTION: Pulls from 400 to redline. POWER BAND: 3800 R.P.M. to 7600 R.P.M. IDLE: (Good) SPECIFICATIONS: Intake: LIFT – 0.272 DURATION – 268 Exhaust: LIFT – 0.272 DURATION – 268 i sent an email asking for cost with shipping.. __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.