Thread: Expansion tank hose routing, and hood release cable routing
View Single Post
Old 11-17-2011, 02:48 AM   #10
pwpanas
Supra Owner
 
pwpanas's Avatar
 
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
pwpanas is on a distinguished road
Default
Quote:
Originally Posted by dave148 View Post
EG-542 is a troubleshooting page in my '97 manual, but I looked through
the entire cooling section of the EG chapter, and found no actual
routing for this hose. There were only some line drawings showing
where the hose attaches to the radiator (obvious). The PDF for autobody
repair was missing some details. the hood release routing appeared to
be one of them. This one is probably more obvious how to route, however.
You may need to get the actual paper copy of the TSRM instead of the pdf... *shrug*
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+
Displacement is no replacement for boost.
Life begins at 30psi.

NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners.
pwpanas is offline   Reply With Quote