supra head gasket questions+ rebuild

burton51m · 06-04-2008, 06:26 AM

Well thanks for the advice.

As far as me and my knowledge with 2 yrs on the forum and over 500 posts...this is a new experience for me. With only being 18 and replacing my own head gasket i believe my knowledge is above average about cars, from what i learned from the forms. Just because i don't know where to get a product like RTV and where to put it means you can question MY knowledge learned here. And not to mention this is why they have forums, so people like me can get answers from knowledgeable people like you.

I tried doing research on various forums but i came up with nothing on RTV and especially WHERE to put it properly on the block. If that question was asked it is probably ancient and I would spend days looking for it.

I AM using a thin layer of Hylomar on the block and head to get a good seal though.

06-04-2008, 06:26 AM	#159
burton51m Lexus & 550's Join Date: Feb 2006 Location: Canton, OH Posts: 536	Well thanks for the advice. As far as me and my knowledge with 2 yrs on the forum and over 500 posts...this is a new experience for me. With only being 18 and replacing my own head gasket i believe my knowledge is above average about cars, from what i learned from the forms. Just because i don't know where to get a product like RTV and where to put it means you can question MY knowledge learned here. And not to mention this is why they have forums, so people like me can get answers from knowledgeable people like you. I tried doing research on various forums but i came up with nothing on RTV and especially WHERE to put it properly on the block. If that question was asked it is probably ancient and I would spend days looking for it. I AM using a thin layer of Hylomar on the block and head to get a good seal though. __________________ Last edited by burton51m; 06-04-2008 at 06:31 AM.