crank shaft pulley puller

supramacist · 04-13-2007, 03:49 AM

I pulled off of it today and I was actually coming back to see what everyone thought about what you said because pulling the starter puts me right where I need to be. But I didn't know if it would damage anything or not.

There's definitley no easy way to do this. I just put the starter on as well about a week ago.

I couldn't get a 19 on it. I used a 21 with hex head grooves, fit's perfectly. My set went from 19mm to 21mm. I thought I was going to have to buy a 20mm socket. These engines are basically the same but they do have differences.

Thanks for the responce.

04-13-2007, 03:49 AM	#3
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	I pulled off of it today and I was actually coming back to see what everyone thought about what you said because pulling the starter puts me right where I need to be. But I didn't know if it would damage anything or not. There's definitley no easy way to do this. I just put the starter on as well about a week ago. I couldn't get a 19 on it. I used a 21 with hex head grooves, fit's perfectly. My set went from 19mm to 21mm. I thought I was going to have to buy a 20mm socket. These engines are basically the same but they do have differences. Thanks for the responce.