Flatout Gaskets

mrnickleye · 02-09-2007, 05:35 AM

http://www.toyota-supra.info/forums/...ead.php?t=6206

I used this MLS ....for my N/A with a slightly milled head. Ishino is what Toyota used OEM, but now improved design for better sealing, and BHG control.

I spent hrs on the net researching supra headgaskets. Mine is N/A with only slight mods. I wanted to do the best job I could to never have a BHG again. Almost 2 years later, and daily 'hotrod' driving, no troubles.

http://replacement.speedyperformance...l=null&dp=true

Don't just throw a gasket on there. Take the head to a good machine shop and have it checked for warpage & cracks, a valve job, touch up milling and valve lash adjustment.
Mine was $450.

02-09-2007, 05:35 AM	#4
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	Read http://www.toyota-supra.info/forums/...ead.php?t=6206 I used this MLS ....for my N/A with a slightly milled head. Ishino is what Toyota used OEM, but now improved design for better sealing, and BHG control. I spent hrs on the net researching supra headgaskets. Mine is N/A with only slight mods. I wanted to do the best job I could to never have a BHG again. Almost 2 years later, and daily 'hotrod' driving, no troubles. http://replacement.speedyperformance...l=null&dp=true Don't just throw a gasket on there. Take the head to a good machine shop and have it checked for warpage & cracks, a valve job, touch up milling and valve lash adjustment. Mine was $450. __________________ Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08. Last edited by mrnickleye; 02-09-2007 at 06:47 AM.