View Single Post
Old 09-03-2006, 05:00 PM   #6
jfunez
12psi boost
 
jfunez's Avatar
 
Join Date: Oct 2005
Location: georgia,usa
Posts: 338
jfunez is on a distinguished road
Default

also what you can do is use an extension and a swivel socket from the front, under the intake to get to the bolt while holding the rear of the nut or socket (the transmission side) with a wrench or one of those ratchet wrenches.

good luck... its a lot easier when you have a lift or the intake manifold off the vehicle.

I'm surprised you could see and get to the solenoid wire,nut.
jfunez is offline   Reply With Quote