Cold Air Intake 4 Mk3

SupraSaver87 · 07-05-2006, 10:49 PM

I have a little theory there. I have NO CLUE if it would work well, or just again...make the car unique and look better. But here it is:

Would it be possible to run a metal tube just behind the stock front spoiler (The lower part of the bumper....houses the running lights) and then weld on some type of metal heat sink style stuff on the outside of the tube.

With this setup I could see there being a SLIGHT decrease in PSI, however the lower temp achieved by this system could POSSIBLY make up for the longer pipe, and if tweaked, I could see this working VERY well.

07-05-2006, 10:49 PM	#31
SupraSaver87 3" Exhaust Join Date: Jun 2006 Location: Manitoba Posts: 150	Theory I have a little theory there. I have NO CLUE if it would work well, or just again...make the car unique and look better. But here it is: Would it be possible to run a metal tube just behind the stock front spoiler (The lower part of the bumper....houses the running lights) and then weld on some type of metal heat sink style stuff on the outside of the tube. With this setup I could see there being a SLIGHT decrease in PSI, however the lower temp achieved by this system could POSSIBLY make up for the longer pipe, and if tweaked, I could see this working VERY well. __________________ My Ride: http://www.cardomain.com/ride/2351563 Our Supra’s, which art in the driveway, Hollowed be thy power, thy mods are great, thy speed endless, On the road or at the track. Give us this day free of cops, And forgive us our impound charges, as we forgive those who are slow. And lead us not into speed traps, and deliver us from the interceptors, For thine is our car, the power, and the glory…forever and ever….amen.