Having trouble getting motor separated from tranny...

kwnate · 12-11-2005, 11:23 PM

Yes undo those bolts. Loosen a little at a time and turn the engine over (by turning the crankshaft bolt) to the next. It helps having a helper to turn til you see the next bolt, you want to go evenly to releive the pressure. there are 6 or so. then it will slide right off. Access them through the inspection covers on the tranny. Good luck.

12-11-2005, 11:23 PM	#4 (permalink)
kwnate Lexus & 550's Join Date: Jul 2005 Location: Everett, WA Posts: 531	Yes undo those bolts. Loosen a little at a time and turn the engine over (by turning the crankshaft bolt) to the next. It helps having a helper to turn til you see the next bolt, you want to go evenly to releive the pressure. there are 6 or so. then it will slide right off. Access them through the inspection covers on the tranny. Good luck. __________________ Nate 842rwhp 7m with 100shot Only 735rwhp on boost... Cardomain Link Last edited by kwnate : 12-11-2005 at 11:26 PM.