newbie question

1989stupra_targaturbo · 07-12-2014, 01:25 AM

I figured out why i wasnt getting any codes flashing... wrong terminals mentioned in post... not t and e1.. but te1 and e1 worked much better (maybe the other terminals were for a different year, but these other terminals work for 89)
i got code 31 and 52. i had the afm off to clean with carb cleaner... hasn't run or idled well since. not sure which direction to go here... i checked with mulitmeter and resistance was present about .1500 ohms.
im in ontario, so used afm's are getting hard to find. any ideas on where i can get a used one?

07-12-2014, 01:25 AM	#2
1989stupra_targaturbo Stock Join Date: Jun 2014 Location: ontario canada Posts: 15	Wrong info I figured out why i wasnt getting any codes flashing... wrong terminals mentioned in post... not t and e1.. but te1 and e1 worked much better (maybe the other terminals were for a different year, but these other terminals work for 89) i got code 31 and 52. i had the afm off to clean with carb cleaner... hasn't run or idled well since. not sure which direction to go here... i checked with mulitmeter and resistance was present about .1500 ohms. im in ontario, so used afm's are getting hard to find. any ideas on where i can get a used one?