View Single Post
Old 02-23-2012, 02:47 PM   #10
pwpanas
Supra Owner
 
pwpanas's Avatar
 
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
pwpanas is on a distinguished road
Default

Quote:
Originally Posted by priyesh12 View Post
Haha yeah, I'll see if i can't get my hands on some isopropyl or denatured ethanol. Race fuel, I'm not too sure on that since I live in Africa literally in the middle of no where lol....but I see if I can find some for sure.
Cool. Also, toluene (also known as xylene) is a good octane booster - please do some reading before using it though, I believe you have to mix in some marvel mystery oil or 2-stroke synthetic motorcycle oil along with it.

Quote:
Originally Posted by priyesh12 View Post
...Okay so I did the bicycle pump test you mentioned...the results were what I hoped for...the MS-2 was not modifying the voltage, the sensor output was equal to that of the MS-2 and so I guess its working properly...so perhaps this MS-2 is worth the money then!

Thanks for the help!
Anytime. I assume you also checked above the cut point, and confirmed that the voltage is actually getting clamped. If so, I agree it looks very good for this device.
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+
Displacement is no replacement for boost.
Life begins at 30psi.


NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners.
pwpanas is offline   Reply With Quote