90' Supra Turbo A/T Build - Page 2

mkiiisupra · 09-18-2008, 07:41 AM

Function before form.

I will definantly get it repainted, perhaps a darker blue. No body rust. No dings dents or anything else. A body kit will never touch my car.

But wont be for awhile and will probably end up costing from 2000-3000 plan on getting it done right which also means ill need to take it out of this state lol...

Anyways alot to do this coming week so ill have more pictures

Delete the rest of the A/C system to make room for Oil/Tranny cooler
Find a good mounting point for:
Trans Oil Filter
Engine Oil Thermostat
Engine Oil dual filter
Engine/Tranny Coolers
Figure out routing and measure out the SS lines
PS Line replace w/ SS line from driftmotion.com

mkiiisupra · 09-22-2008, 11:31 PM

Some pics so far... And yes this is a major pain in the ass, have to buy more AN fittings and send others back so ill be delayed and unable to finish for a little while, will probably go ahead and route what i can for now.. ne ways

Grandavi · 09-29-2008, 06:22 AM

Nice seeing a car getting done right... really good work here.

mkiiisupra · 10-08-2008, 10:15 PM

More pictures of the routed lines. All up and running now no leaks thankfully

SilverBullet05 · 10-09-2008, 04:08 AM

looks like a lot of fun cant wait ot start mine. There must be miles of briaded hose on that thing looks good so far keep it up.

mkiiisupra · 10-09-2008, 11:53 AM

about 15 feet of engine and tranny oil lines and less than one foot for the turbo drain/feed lines

suprra_girl · 10-11-2008, 12:20 AM

Wow

Fantastic work going on there!!! Engine looks great

Keep up the good work

916MKIIIx2 · 11-12-2008, 12:14 AM

I just purchased the same year supra, was wondering if the HKS 2301-RT028 2.0mm thick x 86.00mm metal head gasket would hook right up to the stock application, if so will the ARP 203-3902 studs and bolts fit properly also?

09-18-2008, 07:41 AM	#11 (permalink)
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: sumter, sc Posts: 523 Blog Entries: 2	Function before form. I will definantly get it repainted, perhaps a darker blue. No body rust. No dings dents or anything else. A body kit will never touch my car. But wont be for awhile and will probably end up costing from 2000-3000 plan on getting it done right which also means ill need to take it out of this state lol... Anyways alot to do this coming week so ill have more pictures Delete the rest of the A/C system to make room for Oil/Tranny cooler Find a good mounting point for: Trans Oil Filter Engine Oil Thermostat Engine Oil dual filter Engine/Tranny Coolers Figure out routing and measure out the SS lines PS Line replace w/ SS line from driftmotion.com __________________ 1990 Toyota Supra Turbo A/T ------------------------------------------------ Mods: Replaced Vacuum lines X Complete turbo rebuild X Low mileage jdm engine w/ metal head gasket X BIC performance 3" Downpipe w/ Divorced Wastegate X Cooleeze IC Piping X LIPP Air Filter Adapter w/ AEM Dry Flow Filter X HKS SSQV X Greddy e-manage X BIC Test Pipe X RS*R GTII EXMAG ------------------------------------------------ Questions about oil? take a look http://www.supramania.com/aehaas/

09-22-2008, 11:31 PM	#12 (permalink)
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: sumter, sc Posts: 523 Blog Entries: 2	Some pics so far... And yes this is a major pain in the ass, have to buy more AN fittings and send others back so ill be delayed and unable to finish for a little while, will probably go ahead and route what i can for now.. ne ways __________________ 1990 Toyota Supra Turbo A/T ------------------------------------------------ Mods: Replaced Vacuum lines X Complete turbo rebuild X Low mileage jdm engine w/ metal head gasket X BIC performance 3" Downpipe w/ Divorced Wastegate X Cooleeze IC Piping X LIPP Air Filter Adapter w/ AEM Dry Flow Filter X HKS SSQV X Greddy e-manage X BIC Test Pipe X RS*R GTII EXMAG ------------------------------------------------ Questions about oil? take a look http://www.supramania.com/aehaas/

09-29-2008, 06:22 AM	#13 (permalink)
Grandavi 3" Exhaust Join Date: Jul 2008 Location: Calgary, Alberta, Canada Posts: 175	Nice seeing a car getting done right... really good work here. __________________ My Links: What I am doing... http://www.toyota-supra.info/forums/...part-list.html My questions http://www.toyota-supra.info/forums/...w-answers.html

10-08-2008, 10:15 PM	#14 (permalink)
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: sumter, sc Posts: 523 Blog Entries: 2	More pictures of the routed lines. All up and running now no leaks thankfully __________________ 1990 Toyota Supra Turbo A/T ------------------------------------------------ Mods: Replaced Vacuum lines X Complete turbo rebuild X Low mileage jdm engine w/ metal head gasket X BIC performance 3" Downpipe w/ Divorced Wastegate X Cooleeze IC Piping X LIPP Air Filter Adapter w/ AEM Dry Flow Filter X HKS SSQV X Greddy e-manage X BIC Test Pipe X RS*R GTII EXMAG ------------------------------------------------ Questions about oil? take a look http://www.supramania.com/aehaas/

10-09-2008, 04:08 AM	#15 (permalink)
SilverBullet05 Stock Join Date: Jul 2008 Location: Iowa Posts: 27	looks like a lot of fun cant wait ot start mine. There must be miles of briaded hose on that thing looks good so far keep it up. __________________ ALL BOOST NO JUICE! I need a motor ASAP

10-09-2008, 11:53 AM	#16 (permalink)
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: sumter, sc Posts: 523 Blog Entries: 2	about 15 feet of engine and tranny oil lines and less than one foot for the turbo drain/feed lines __________________ 1990 Toyota Supra Turbo A/T ------------------------------------------------ Mods: Replaced Vacuum lines X Complete turbo rebuild X Low mileage jdm engine w/ metal head gasket X BIC performance 3" Downpipe w/ Divorced Wastegate X Cooleeze IC Piping X LIPP Air Filter Adapter w/ AEM Dry Flow Filter X HKS SSQV X Greddy e-manage X BIC Test Pipe X RS*R GTII EXMAG ------------------------------------------------ Questions about oil? take a look http://www.supramania.com/aehaas/

10-11-2008, 12:20 AM	#17 (permalink)
suprra_girl 7M POWAH! ;) Join Date: Jun 2004 Location: New Zealand Posts: 2,314	Wow Fantastic work going on there!!! Engine looks great Keep up the good work __________________ Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first!

11-12-2008, 12:14 AM	#18 (permalink)
916MKIIIx2 Stock Join Date: Nov 2008 Location: California Posts: 3	I just purchased the same year supra, was wondering if the HKS 2301-RT028 2.0mm thick x 86.00mm metal head gasket would hook right up to the stock application, if so will the ARP 203-3902 studs and bolts fit properly also?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode