Parting out 1984 MKII Manual Crate Motor

strt_six_84 · 07-04-2007, 05:54 PM

I have the following motor and parts for sale:
-6M-GE crate motor (Japan)- NOT 5M, built for 11.5/1 compression
-5M motor not asssembled, ready for rebuild have all components.
-Complete Car, Roilling Chassis (will be a shell if parts sell)
-Longer stroke, higher comp.
-Pacesetter exhaust system
-Doug Thorley Chrome header
-BullFrog Cams (have specs)
-Centerforce III Clutch and Manual Tranmission
-C's short shifter with silver eagle pommel
-(4) K-1 Racing Rims with tires
-Brembo Rotors and break pads
-HKS air filter
-MSD upgraded ignition system
-Ported and polished head from 5M Mueller Aluminum lightened flywheel
-AEM Fabricated air intake- from lower front of bumper to Intake manifold.
-AEM Fuel/ Air ratio controller
-AEM Cam sprockets
-New radiator

$2500 obo takes it all.

Mark's MKII · 07-08-2007, 05:45 AM

Pics and prices would be nice.

strt_six_84 · 07-10-2007, 03:57 AM

If anyone is interested in particular parts let me know.

Mark's MKII · 07-14-2007, 03:31 AM

Price on the header and air filter.

Thanks,
Mark

MKII guy · 08-08-2007, 09:41 PM

Please price tranny, shifter, and all for transforming auto trans car to manual. (slave cylinder, bell housing, probably drive shaft, center console, flywheel/pressure plate, etc.) Also need a passenger side tail light lens assembly (mine is cracked). Thanks.

BlkSupra84 · 10-14-2007, 05:48 AM

I need the right side moldings and the back and front flares that surround the back wheel including the rubber strip that goes above the wheel. (The rubber strip is part of the molding for the back wheel).

Silver '85 · 11-05-2007, 07:17 PM

Do you still have the wheels?
If so, what size, width, offset?
Thanks

07-04-2007, 05:54 PM	#1 (permalink)
strt_six_84 Stock Join Date: Jul 2007 Location: NJ Posts: 2	Parting out 1984 MKII Manual Crate Motor I have the following motor and parts for sale: -6M-GE crate motor (Japan)- NOT 5M, built for 11.5/1 compression -5M motor not asssembled, ready for rebuild have all components. -Complete Car, Roilling Chassis (will be a shell if parts sell) -Longer stroke, higher comp. -Pacesetter exhaust system -Doug Thorley Chrome header -BullFrog Cams (have specs) -Centerforce III Clutch and Manual Tranmission -C's short shifter with silver eagle pommel -(4) K-1 Racing Rims with tires -Brembo Rotors and break pads -HKS air filter -MSD upgraded ignition system -Ported and polished head from 5M Mueller Aluminum lightened flywheel -AEM Fabricated air intake- from lower front of bumper to Intake manifold. -AEM Fuel/ Air ratio controller -AEM Cam sprockets -New radiator *$2500 obo takes it all.* Attached Thumbnails Last edited by strt_six_84 : 07-10-2007 at 03:55 AM. Reason: adding pictures

07-10-2007, 03:57 AM	#3 (permalink)
strt_six_84 Stock Join Date: Jul 2007 Location: NJ Posts: 2	If anyone is interested in particular parts let me know. Attached Thumbnails Last edited by strt_six_84 : 07-10-2007 at 04:07 AM.

08-08-2007, 09:41 PM	#5 (permalink)
MKII guy Stock Join Date: Aug 2007 Location: Tennessee Posts: 5	Please price tranny, shifter, and all for transforming auto trans car to manual. (slave cylinder, bell housing, probably drive shaft, center console, flywheel/pressure plate, etc.) Also need a passenger side tail light lens assembly (mine is cracked). Thanks. Last edited by MKII guy : 08-08-2007 at 09:46 PM.

10-14-2007, 05:48 AM	#6 (permalink)
BlkSupra84 Stock Join Date: Oct 2007 Posts: 2	moldings and flares I need the right side moldings and the back and front flares that surround the back wheel including the rubber strip that goes above the wheel. (The rubber strip is part of the molding for the back wheel).

11-05-2007, 07:17 PM	#7 (permalink)
Silver '85 Stock Join Date: Nov 2007 Location: Boston area Posts: 2	Data on wheels? Do you still have the wheels? If so, what size, width, offset? Thanks

07-08-2007, 05:45 AM	#2 (permalink)
Mark's MKII 3" Exhaust Join Date: Apr 2006 Location: Joelton TN. Posts: 70	Pics and prices would be nice.

07-14-2007, 03:31 AM	#4 (permalink)
Mark's MKII 3" Exhaust Join Date: Apr 2006 Location: Joelton TN. Posts: 70	Price on the header and air filter. Thanks, Mark

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP PLEASE	Nick0887	The General Questions	3	08-13-2007 07:21 PM
Parting Out 89 Supra Manual/ Gray Interior	SUPRASUPRA	Parts For Sale	24	11-29-2006 05:46 AM
Retractable Shade for MKII (1984)	marcus_mk2_84	Exterior , Interior, and Detailing	7	10-04-2006 12:27 AM
1984 Supra Parting Out	yotaparts	Parts For Sale	2	04-30-2006 04:04 AM
1984 MkII front cross member needed	barton	MKII Supra	3	04-12-2006 05:05 PM